Jerry February 27, 2016 for Model Number ZEM200SF001 I would like to replace the heat treated glass in the door. It did not shatter but the outside film has worn away and it always looks dirty. Am I ordering an Inner Screen or is it called something else? Is this a big job to replace? Thanks
1 Answer Hello Jerry, The innermost glass is the one with the screen on it and is referred to on the manufacturers' parts list as the door screen WB55X10581. This will require the removal of the door choke during the doors' dis-assembly. This is not a very big job but the door choke WB55X10583 will normally break and have to be replaced for it to stay properly in its' position. Read More...
Christopher June 24, 2015 for Model Number zmc1095sf03 My outer glass door has cracked on my wall microwave, model zmc1095sf03. Which part number should I order to replace the glass. Thank you.
Mary D. April 23, 2015 for Model Number Monogram Microwave ZMC1095SB001 The outer glass has shattered on my Monogram ZMC1095SB001--which item should I order to replace it? Thanks.
Bill April 08, 2015 for Model Number ZMC1095SF001 Is the AP2030100 a replacement for my mod# ZMC1095SF001 outer door glass?
1 Answer Hello Bill! Yes, part number WB36X10122 is the correct outer door glass listed for your model ZMC1095SF001. Thanks! Read More...
John January 28, 2015 for Model Number ZMC1095SF03 Just to be clear -- this assembly screen is the glass and stainless steel outer shell together? Thanks!
1 Answer John, Yes, that is correct that the Assembly WB36X10122 is the glass and screen. Read More...
Tom S. January 14, 2015 for Model Number JEB1095SB001 My dimensions for the door are 26" x 12". Does this part have the same dimensions?
1 Answer Tom, the screen assy WB36X10122 is approx. 26" x 12". However, based on the model number given your unit uses part number WB36X10118. Thanks. Read More...
Alfred M September 17, 2014 for Model Number ZMC1095SF001---ZMC1095BV-01 On a ZMC1090BV-01 27" microwave the outer door glass shattered. The part (#95 diagram" WB36X869 replacement is listed as "No longer available" Is the ZMC1095SF001 Part #AP2030100 Assembly Screen an suitable replacement that could be used to replace the exterior glass? The WB36X869 glass measured 26"W x 12'H x 1/8"thick. What are the exact dimensions of the AP2030100 glass? This part is listed as available...and I hope it is. Thanks for your prompt response. 253 432 4998
1 Answer Hello Alfred! Unfortunately, the manufacturer does not offer WB36X10122 as a compatible replacement to the discontinued WB36X869 and we do not have the measurements available to verify if the parts will work. Sorry about that! Read More...
Jon March 27, 2013 for Model Number zmc1095sf03 The exterior glass on door shattered. What is part number? Is it attached to the exterior SS panel? Do I have to replace both items, if so can I have both part numbers? Glass on inside assy (wb55x831) is fine. Thanks.
Lorna February 03, 2013 for Model Number zmc1095sf001 repositioning the insulator foam ( silver covered foam which has slipped out of place before, WITHOUT INCIDENT). Ttoday while removing stainless cover with glass middle whole thing landed on floor in a million pieces. Stainless front and handle intact the rest is shot. looks like replacement part is #124 according to diagram. please correct or confirm.
Deborah R. January 22, 2013 for Model Number ZMC1095SF001 Is the front glass attached to the Stainless Steel front door?