Wayne C. December 28, 2017 for Model Number DPSE810GG0WT My dryer makes a humming noise when I press the start button but the drum doesn't turn. Is the belt broken?
1 Answer Wayne, Try to open the door and tape off the door switch, then push the start button and rotate the drum while pushing and see if it will continue to rotate. If it does then it is a bad start winding on the motor and motor will need changed. Read More...
Tammy M. October 16, 2017 for Model Number DPSR610EG0WT When I press the dryer button the drum does not turn but it heats up. I have to keep my finger on the start button for it to run otherwise is stops. Without taking the dryer apart I was wondering if this could be the dryer belt and if there is a way to tell without taking it completely apart. Thank you
1 Answer Hello Tammy. No, it is not the belt. Based on the information you provided, it sounds like the motor is bad and will need to be replaced on the unit. Thanks. Read More...
Mikael October 09, 2017 for Model Number WE12M22 I have this old model WE12M22 , i want know now if is same model WE12M29....thank you
1 Answer Hello Mikael. Yes, you will need to order WE03X29897 for the belt needed. Thank you. Read More...
Wilfredo March 28, 2017 for Model Number mod dvlr223gg7ww I bought a drum belt to replace the broken one but when I try to install it is to loose thought it is the same belt as the old one...it seem that the idler wheel is not pressing on the belt....how can i make it press the belt?..
1 Answer Hello Wilfredo. You will need to check and make sure your routing the belt properly around the pulleys and that the idler spring arm WE03X20434 is in the correct location on the motor plate to apply pressure to the belt.. Read More...
Henry S. October 30, 2016 for Model Number DPSR610 My broken dryer belt measures 90 inches,do they stretch over time, the replacement belt on your site says it is 89 inches.
1 Answer Henry, Yes, there is a minor amount of "stretching" on the dryer belt(s) depending on age and usage. The idler pulley and tension spring will usually compensate for the 1/2 to 3/4 inch change in the length. Replace the belt and you'll be fine, Read More...
1 Answer Hello Joe. Check the bearings, idler pulley, rollers, and blower wheel on the unit. Read More...
Mason August 22, 2016 for Model Number htdx100em8ww Are the parts for the HTDX100EM8WW the same as other models of hot point dryer? Thanks
1 Answer Hello Mason. No, you have to order your parts according to the model number your working on. WE03X29897 is the belt you would need. Read More...
Richard G. June 07, 2016 for Model Number ds4600eeoww I checked the model # it is ds4600eeoww my belt measures 90 1/2 will the 89 1/2 fit. If this will fit how do I order thanks Richard
1 Answer Richard, Yes the WE03X29897 / WE12M29 Is the correct drive belt and will fit and work in the model number you supplied. To order the part, place your cursor on the bracketed [ ] AP number and click, this should take you to parts display and order screen, click on the add to cart box, and follow the instructions. The part is in stock and available at this time, there shouldn't be any issues. If you prefer, you can contact the AppliancePartsPros.com Customer Service Team at 1-877-477-7278 they will be happy to place your order for you and answer questions you may have. Thanks, Read More...
Jonathan May 03, 2016 for Model Number DQSR483EE1WW My dryer is making a loud, grinding noise as it works. I've replaced the front glide bearings and their mount which fixed the squealing. Now, I'm convinced that I need to look at the bearing assembly in the dryer. Would this be the cause of the loud "grinding" noise in the dryer?
1 Answer Hello Jonathan, The grinding sound can be the rear drum bearing WE25M40, the idler pulley WE12X83, or the motor assembly WE17X10010. Read More...
Bill August 10, 2015 for Model Number dhdsr46665ww Hi, Our ge dryer works fine but every so often it starts squealing loud and than after a while it go back to a quiet mode. Is it the belt or something else? Thank you. Bill
1 Answer Hello Bill. You need to check and see if the front bearing WE3M26 and glides WE03X37318 x2 WE03X37317 x2 are bad and if the rear support bearing WE25M40 will need to be replaced. Read More...