Richard October 08, 2018 for Model Number GSH25JFXN BB When going from one function to another The water stops working. Then going from crushed ice to cube it stays on crushed. going back to the water no water, but the ice maker still makes ice.
2 Answers Richard, For the issue with no water disconnect the water line at the bottom of the door and see if water comes out from the tube coming from under the refrigerator when the water dispenser is pushed. If there is then the issue will be a frozen water line and you would need to replace the freezer door for this model if the serial number does not begin between AF and AM. If the serial starts between these then you could use heater kit WR49X10173. If no water comes out then it could be a dispenser control board issue. If the ice is not switching to cube check the crush cube solenoid in the back and make sure that it is not stuck in the up position and if it is try to get it to the down position. It could be stuck causing crushed only. If this is not the case then the dispenser control would again be the issue. Read More...
Richard October 08, 2018 for Model Number GSH25JFXN BB When going from one function to another The water stops working. Then going from crushed ice to cube it stays on crushed. going back to the water no water, but the ice maker still makes ice.
2 Answers Richard, You have a wire harness that comes thru the bottom of your door. I would check that harness for damaged wires or broken wires. Read More...
Charles M July 12, 2016 for Model Number GSL22JFTABS The original main board had the following WKKT 1304-00-00A 200D6221G009 4706DG Original Front panel control 200D7355G006. New Main board WKKT 0158-00-01 GEA Part 200D4854G009 1304 DG the front panel just flashes zero zero not resets work. Tried a second front panel same part number and it still flashes zero zero. Did a continuity check on the cables from the front control to the main board all three wire ohm out (nothing grounded). I assume there is some compatibility issue between the replacement main board and the front operator panel.
1 Answer Charles, You will want to check the connector at the bottom of the freezer door that is at the freezer door hinge. While you may have checked the continuity there could still be an issue with the wiring. Read More...
Charlie June 10, 2016 for Model Number GSL22JFTABS After replacing the main board wr55x10942 and the wr55x10563 the panel just flashes 0 0. I have held the two colder/warmer buttons for 5 seconds but the flashing continues The model # GSL22JFTABS
1 Answer Charlie, You will want to try repeatedly pressing the colder buttons on the freezer and then on the refrigerator to see if this will turn on the control but also check to make sure that the control lock is not on. Read More...
Charles June 10, 2016 After replacing the main board wr55x10942 and the wr55x10563 the panel just flashes 0 0. I have held the two colder/warmer buttons for 5 seconds but the flashing continues
1 Answer Hello Charles. We will need your model number to help you with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Rudy March 10, 2016 for Model Number gsh25jeftacc Refrigerator is running no water. l changed water filter and the valve still no water. The display lights are blinking reading o o also the lock light keep blinking. l hold for 3 seconds won't stop could it be the board if yes how could l check to make sure it is?
1 Answer Hello Rudy. Based on the information you provided, you already did the test. If the button does not unlock the panel, then the HMI WR55X23213 is bad on the unit. Read More...
Dan R December 03, 2015 for Model Number GSH22JFTDCC Nothing lights up on the dispenser control and the refrigerator and freezer are warming up. Is there a way to see if it is the main control board or the dispenser control is the problem?
1 Answer Hello Dan. You will need to test for power from the main board to the dispenser board. If there is power there, then the dispenser board is bad. If there is no power there, then the main board is bad. Read More...
Ralph A June 29, 2015 for Model Number GSH25JFTACC Cannot set temps with control panel. Panel readings do not indicate freezer or refrig and cannot be adjusted normally. Installed new display panel (PN AP3950076) and nothing changed. Is my problem the main board in the back of unit? Both sides seem to be cooling normally - making ice, etc. Thanks
1 Answer Ralph, You will want to make sure that the control lock out is not set on the dispenser control board. If it checks ok then the main control board would be the issue. Read More...
Chevell July 31, 2014 for Model Number Gsh22jfxaww My side by side refrigerator cooler is not adjusting only goes from 5F to 9F And freezer goes from 0F to 9F. My fresh food freezing could it be dispenser board or a fail sensor.
1 Answer Chevell, The most likely cause for the refrigerator section freezing would be a faulty damper assembly which is part number WR60X10215. Read More...
1 Answer Hello Gregory, I'm guessing at the part number since there was no model number included but it looks like possibly the WR55X23210. Read More...