Kip February 05, 2026 for Model Number JDP39CK2CC I replaced the original control board with a new one, Part # WB27X45466. This one will not come on either. There is a white jumper wire on the back of the new board. There wasn't one on the old board. Do I need to remove the white jumper wire on the new board for this one to work? I have 240 volts at the plug-in.
1 Answer Hello Kip, thank you for contacting AppliancePartsPros.com If the original control board did not have the jumper wire then it can be safely removed from the new board. You will need to program the personality code for this model once it comes on, the personality code for yours is 13. If the control still isn't coming on after removing the jumper wire, you will need to check incoming voltage to the board. Read More...
Richard January 21, 2026 for Model Number JBP68H0K3WW I replaced the control board and cannot find my model number listed on the paperwork for the personality code, could you give me the proper code? Also there is a jumper wire on the new control board that was not on the old one, is it needed for this model or can I remove it? Thank you.
1 Answer Hello Richard, thanks for reaching out to AppliancePartsPros.com The personality code for your model is 15. If the original control did not have the jumper you can remove and discard the jumper on the new board. Read More...
William S January 07, 2026 for Model Number JGB566DEK5BB My oven stopped working, I replaced the ignitor and the oven sensor, it's still not working. A technician told me to replace my control module. I noticed in the reviews people asking about a personality code. Can you explain what that means and what would determine mine please?
1 Answer William, With the new control board, there will be a personality code that will need to be set based on the original control board part number. There should be a sheet that will tell what personality codes there are for each one. Read More...
Spencer January 02, 2026 for Model Number JBS55W0K2WW I set the wrong personality code, how to I reset it so I can put in the correct code?
1 Answer Hello Spencer, thanks for reaching out to AppliancePartsPros.com Your model's personality code is 17. You can change the current personality code using the following instructions: 1. Press START and UP for 2 seconds, within 5 minutes of power up, to display the current personality. 2. Select the personality setting using the UP and DOWN keys until the desired personality number appears in the display. If unable to locate personality setting number on the display, the wrong control may have been ordered or shipped. 3. To set the personality, press and hold the START key for 2 seconds. The control will reboot with the selected personality setting. Read More...
Michael December 22, 2025 for Model Number WB2 7X45466 I ordered this one but mine WB27T10468 does not have a jumper wire from the yellow the purple can I remove it
1 Answer Hello Michael, thank you for contacting AppliancePartsPros.com If your original control board did not have the jumper wire then you can disconnect it from your new control board and discard it. Read More...
David December 18, 2025 for Model Number JB255DJ4BB I replaced. With the control board with part WB27X45466. What is the personality code?
1 Answer Hello David, and thank you for your question. This model would use the program personality code 32. Read More...
David December 18, 2025 for Model Number JB255DJ4BB I replace the control board with part WB27X45466 but i can't find the personality code for this model number JB255DJ4BB. Can you please help with the personality code. Thank you
1 Answer Hello David, and thank you for your question. This model would use the program personality code 32. Read More...
Bill R December 14, 2025 for Model Number RB790SH1SA Replaced the control board with part WB27X45466, what is the personality code?
Greg November 29, 2025 for Model Number JB655SK1SS Hi how do I program the new WB27X45466 to my GE—- JB655SK1SS range the personality settings is not on the sheet?
1 Answer Hello Greg, thanks for reaching out to AppliancePartsPros.com The personality code for your model is 163. Read More...
Bryan November 15, 2025 for Model Number JBP23DN1WW I replaced the control board on my stove and it is asking me for the personality code. What code number should I use for this model?
1 Answer Hello Bryan, thank you for contacting AppliancePartsPros.com The personality code for your model is 16. Read More...