1 Answer Hello Jim! The grate feet used on your model is part number W10185266. This kit comes with four feet in a package. Thanks! Read More...
Treese May 07, 2012 for Model Number MGR7775WB Maytag 30" freestanding gas range I need grate feet for my MGR7775WB Maytag 30" freestanding gas range, do you have a part that will work?
1 Answer Hellol Treese! Unfortunately, the manufacturer does not offer the grate feet separate from the grates on model MGR7775WB*. Sorry about that! Read More...
Chuck M. March 13, 2012 for Model Number Frigidaire Model FPGF3081KFE Will this fit the grates for my model? I called Firigidaire and they want $7.49 for each one!
1 Answer Chuck, according to your model the grate feet you will need to use is part number 5304475129. This is a kit of 8 grate feet and the adhesive for install. Thanks! Read More...
Chas January 21, 2012 for Model Number WFG371LVS1 I have a Whirlpool Accubake range model # WFG371LVS1, that has two grates (part # W10165288). These grates have 4 rubber feet on each of the grates. I need relacement rubber feet for this product. I am not sure if the part AP4411611 will work for my Accubake grates? The Whirlpool site does not show the rubber feet that came on their product. Do you have any futher information on this product, or advice for me?
1 Answer Hello Chas! For your model WFG371LVS1 the replacement grate feet is part number W10185266. This item comes in a kit of 4. Thanks! Read More...
1 Answer Hello Horation. We will need your model number to help you with this. Thanks. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Hank S. December 28, 2011 for Model Number mgr77757wb 2 I measured the hole in my grates and found that they are 3/16 of an inch. You told Dennis that the part you have is 3/8 of an inch .If you don't have what I need, is there anywhere I could buy them? The part # is AP4411611.
1 Answer Hello Hank. The foot WB02T10461 is 3/16" in diameter and almost 3/8" in length. Hope this helps. Read More...
Dennis W. December 22, 2011 Regarding part No. AP4411611. If the shaft is 3/8" long,what is the diameter of the shaft? The part that sticks in the holes at the bottom of the grate. Thanks, Dennis
1 Answer Hello Dennis. The part that goes into the hole on the foot WB02T10461 is 3/16" in diameter. Hope this helps. Read More...
Bev December 21, 2011 for Model Number KGSA906PSS00 Will these rubber feet fit this Kitchen Aid model. I see that the question was asked by someone else, but with the wrong model number. Thank you
1 Answer Hello Bev. The model number you provided, does not offer the feet for the grates. You can measure and see if the hole is 3/8" rounds for the feet. If so, the feet WB02T10461 should fit the unit. Hope this helps. Read More...
Larry December 14, 2011 for Model Number 911.33212 Kenmore Elite Have a Kenmore Elite gas cooktop that needs rubber feet. The PN from Sears is WB02T10101. I believe this is a GE. What is the replacement number from you? Thanks, Larry
1 Answer Hello Larry. Check and see if the holes on the grates are 3/8" for the feet. If so, WB02T10461 should work on the unit. Hope this helps. Read More...
Dennis December 14, 2011 for Model Number Amana Gas cooktop, (can not find model number) Hi, What is the scale of the grid shown and will these fit an Amana grate? We are unable to find model number on the Amana Gas Cooktop. Thanks, Dennis
1 Answer Hello Dennis. The grid is a 1" grid. The grate feet WB02T10461 are 3/16" shafts. Hope this helps. Read More...