Ronda May 16, 2013 for Model Number GE profile performance I notice the water coming down in drops by the water dispensing area and the ice maker machine not getting any ice. I notice that the water is dripping down and I do think that it has something to do with a water not being able to work from valve. Am I in the right direction?
1 Answer Hello Rhonda, This could be as simple as a filter in need of replacement or low water pressure. If you check the pressure where the water comes into the unit and it is good and strong, and the filter, (if so equipped), is not in need of replacement, (easiest way to check is with the filter bypass plug), the issue is probably the water valve. Read More...
Jackalope December 27, 2012 for Model Number TFF24RB circa 1980-81 new Ice maker turns over when lever is in down position, but no ice comes out. It doesn't seem to be filling with water. How can I verify that the water valve is actually the problem? Thanks,
1 Answer Hello Jackalope. You need to check and see if there is power going to the water valve when the icemaker cycles. If so, replace the water valve on the unit. If not, or the icemaker does not cycle, you will need to replace the icemaker on the unit. Also, check and make sure the fill tube on the unit is not frozen and clogged. If so, replace the water valve and thaw out the fill tube. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Howard S. October 02, 2012 for Model Number TFX27T I want to make sure I am getting the same part that is currently on the refrigerator. Does the part number WR57X88 have screw on fittings for the blue water outlets? The part on my refrigerator has fittings to screw on.
1 Answer Howard, according to your model TFX27T the water inlet valve is part number WR57X10051. This replacement inlet valve has compression fittings. Thanks! Read More...
1 Answer Hello Karyn. The water valve WR57X10051 is located on the back the refrigerator by the compressor. You will need to remove the back cover to access and replace the valve on the unit. Hope this helps. Read More...
1 Answer Hello Helen! The water inlet valve used on your Kitchenaid Refrigerator model KSRS25ILBL02 is part number W10408179. Thanks! Read More...