Greg November 29, 2016 for Model Number PGB980ZEJSS The stove is currently set up for LP, what is needed for a conversion back to NG? Thank you.
1 Answer Greg, To convert this unit back to natural gas you will need the following: Left front burner 2 of orifice WB28K10693 and 1 of WB28K10694, left rear burner WB02X24728, right rear [WB02X24727], right front WB02X24725, and the center [WB16X24983]. You will also need the broil inlet jet [WB28X25664] and the bake WB28X20451 and WB28X20619. Read More...
Sarah September 01, 2016 for Model Number C2S985SET3SS We have a GE stove Model # C2S985SET3SS that we need to convert back from LP to NG. I was wondering which parts I need in order to do the conversion. Thanks Sarah
1 Answer Sarah, You will have to get the following parts to convert back to Natural gas. Orifice holder for the Right front burner WB28K10785, burner tube right rear WB28K10741, burner tube center WB28K10696, burner tube left front WB28K10740, and the burner tube left rear WB28K10475. Read More...
Allan June 30, 2016 for Model Number cgs985set6ss Just purchased this GE Cafe stove, and discovered it was converted to LP - need to replace all 10 orifices with the NG ones - but, there is no equivalent 'reverse' kit to the LP package. are u able to identify and supply all 9 orifices (2 are the same size) ?
1 Answer Allan, You will need to get the following for changing the unit to natural gas. Center orifice holder WB28K10871, front left orifice holder WB28K10740, left rear orifice holder WB28K10475, right rear orifice holder WB28K10741, oven safety valve WB19K10079, the dual cavity elbow for the broil WB28K10798 and the injector assembly for the right front burner WB28K10785. These will have orifice for Natural on them. Read More...
Sonny July 13, 2015 for Model Number RGB530DET4BB I have a Hotpoint range model RGB530DET4BB would like to convert from LP to NG can you please provide me with the orifice part numbers ?
1 Answer Sonny, To convert your unit to natural gas you will need to replace the burner tubes for the main top. The part numbers you will need are right front WB28K10192, right rear WB28K10191, left rear WB28K10188 and left front WB28K10190. For the oven burners you will need to loosen the orifices approximately 1 1/2 to 2 turns and close air shutters on the burner tube to about 1/4 way open. You will also need to flip the regulator cap from lp to nat. Read More...
Cody June 14, 2015 for Model Number JGBS23BEA1AD I would like to convert a model JGBS23BEA1AD gas range from NG to LP and was wondering what I would need to do this.
1 Answer Cody, To convert this unit to LP you will need the following parts. For the right front burner will need the orfice WB28K10032, the right rear will take WB28K10031, the left front and left rear is part number WB28K10023. For the bake you will tighten down the orifice and open the air shutter. For the regulator just flip cap from NAT to LP. Read More...
Harry December 16, 2014 for Model Number JGBP28MEL4BS I need to convert my GE range JGBP28MEL4BS from LP to NG. What orifices do I need. I know how to do the oven. When it was originally converted to lp, they neglected to put the original ones back.
1 Answer Harry, For converting the unit from LP to Natural you will need to replace the orifice holders. The right rear orifice holder is part number WB28K10187, left rear WB28K10188, right front WB28K10189 and left front WB28K10217. For the oven you will need to loosen the orifices about 1 /12 to 2 turns and close the air shutter on the burner to about 1/4 way open. Read More...
James October 08, 2014 for Model Number PGB910SET1SS I need to convert this model stove back to gas. It was originally converted to accept propane. Now I need to have it back to gas. What exactly do I need? Thanks.
1 Answer James, to convert the unit back to NG you'll need the orifice holders. The LR holder is part number WB28K10389, LF holder is part number WB28K10736, center holder is part number WB28K10786, RR holder is part number WB28K10737, and RF holder is part number WB28K10735. Thanks. Read More...
Nancy May 08, 2014 for Model Number jgbp28ded1wh "I have a GE XL44 Model jgbp28ded1wh I have the oven as propane I want to switch back to natural gas what parts do I need?
1 Answer Nancy, you will need four NG orifices part number WB28K10022 to convert back to NG. You'll need to adjust the oven orifice and flip the regulator pin back to NG. Read More...
Nancy May 08, 2014 for Model Number jgbp28ded1wh I have a GE XL44 Model jgbp28ded1wh we had converted to propane and now we want to converted back to natural gas. What parts do I need?
1 Answer Nancy, to convert the unit back to NG you'll need four NG orifices part number WB28K10022. You'll need to adjust the oven orifice and flip the regulator pin back to NG. Thanks! Read More...
Marge November 16, 2013 for Model Number jgb250det1ww Is there a conversion kit to change this model from ng to lp.
1 Answer Marge, To convert the unit to LP you will need the orifices part numbers Right rear [WB28K10031], Right front [WB28K10032] and Left front and rear [WB28K10023]. You will also need to flip the cap on the regulator. Read More...