Customer Questions and Answers for Orifice Spud by Ge

Brian, The following are the parts requested: WB28K10743 WB28K10735 WB28K10389 WB28K10736 WB28K10737 WB28K10706 WB28K10738

Jeff, To be able to convert this unit back to natural gas you will need to replace the orifice holders which would be Center WB28X24762, Right Front WB28X24766, Left Front WB28X26621, Right rear WB28X24764, Left Rear WB28X24763.

Lolly, There is not a universal kit but it shows that you would need 1 orifice WB28K10031, 1 of WB28K10032, and 2 of WB28K10023.

Andrew, To get the Natural gas orifices you will need to get the burner tubes which would be as follows: Center WB28X24762, Right Front WB28X24766, Left Front WB28X24761, Right rear WB28X24764, and Left rear WB28X24763.

Mary, The left two burners use WB28K10023, the right rear is WB28K10834, and the right front is WB28K10032.

Hello Carlo, You will need to order one WB28K10871 for the center surface burner, one WB28K10740 for the left front, one WB28K10475 for the left rear, one WB28K10741 for the right rear, and one WB28K10785 for the right front. You will also need one WB28K10706 for the upper broil, one WB28K10738 for the bake, and one WB28K10708 for the lower bake.

Wesley, the center WB28X24762, left front WB28X26621, left rear WB28X24763, right front WB28X24766, and right rear WB28X24764 orifice holders and the safety valve assembly WB21X38549 would need to be replaced.

JK, Based on the information and model provided the oven orifices should be adjusted 1.5 to 2 turns clockwise and adjust the air shutters full open

David, the left front orifice 316527500, left rear orifice 316527511, center orifice 316527500, right rear orifice 316527504, and right front orifice holder 316543200 would be needed to convert this model to natural gas.

Sandra J, It looks as though the nat gas orifices come in the elbow assembly for the burners and those part numbers are as follows. WB28X20619 WB28X20787 [AP5791228}