Mark December 10, 2019 for Model Number 911.95576790 I pulled out the light bulb holder on my Kenmore range and the black wire contacted the oven body and fried the back of the holder and the black wire terminal and connection. I need a new bulb holder and wire quick disconnect female tab (I don't know the part # for that). Don't know if the wire was damaged all the way up or just at the bulb holder. I found the bulb holder on your site but can't find the correct wire disconnect tab. Thanks
Scott May 05, 2015 for Model Number 911.63261690 Ok so I was changing out the burnt out oven light bulb and a flash went off. When I surveyed the back of the range the oven lamp holders (Part number WB8K5042) two metal clips melted. Not only had the clips meted but the connector clips also melted off. I have purchased a new oven lamp holder but I need the 2 wires that connect to the back of WB8K5042. The wires connect into the back and then run up and across the top of the range and clip onto 4 clips across the top. So again each of the wires have a total of 5 connectors one connecting to the back of the oven lamp holder and the rest running across the top. It is NOT part number WB18K5469. If anyone can tell me what part number these wires carry or where/how to order them I would be eternally grateful.
1 Answer Scott, From what it sounds like, the part number that you would need is TJMA02875-1 and is the female spade connector. If you are referring to clips that hold the wires then it would not be available. Read More...
1 Answer Leslie, To install this part you will first want to shut off power to the range. Once the power is shut down you will need to remove the light lens and then take 2 screws out. With the screws out you should be able to pull down the old holder and install a new one. Read More...
Jack S. November 10, 2013 for Model Number GE P7 SELFCLEANING OVEN I need the complete light socket and cover. The inside of mine came out when I took the bulb out. Thanks.
1 Answer Hello Jack! We'll need the model number to your appliance to verifyt he complete assembly, if available for your model. Please obtain this information and reply to this e-mail for further assistance. Thank you. Read More...