Mj May 27, 2020 for Model Number GDT545PSJ2SS Hi the dishwasher will not start. It has power and the buttons work, but when I press START the amber light on front and the START green light blink repeatedly with a short few beeps. I replaced the door latch unit thinking it thought it sensed the door was not closed. What is next? A control board? Thank you very much.
1 Answer Hello MJ, the control panel may be in child-lock mode, to lock/unlock press the HEATED DRY pad for 3 seconds, or the control may be DEMO mode and to exit it press START and HEATED DRY for 5 seconds. Read More...
Richard July 08, 2019 for Model Number gdf570ssj2ss How does the liner panel remove after removing the Torx screws?
1 Answer Richard, once the Torx screws are removed, the liner panel should lift up from the outer panel. Read More...
Galen Denio April 29, 2019 for Model Number GE Mod # GDT695SMJES How do I replace the latch strike on this dishwasher. Is there a video of the procedure?
1 Answer Galen, To replace the striker latch you would need to remove the screws from the interior door and lift up on the inner door panel. This will give access to the strike. Read More...
Jay January 24, 2019 for Model Number Ddt595ssj2ss How do I take door liner off to change the striker
1 Answer Jay, the outer door panel is the part that would be removed to access the inside of the door. To do this, you will need to remove the screws located at the bottom of the door that are holding the outer panel up. Once you remove these two screws, the outer panel will slide down and off of the door assembly. This will give you access to the interior of the door to change out the strike. Read More...
George Ii October 31, 2018 for Model Number GE Adora dishwasher DTT595j0ss How do I remove the inner panel to replace the latch # 804 in diagram Do I remove the door first? Thanks
1 Answer George, The model number is not pulling up as being valid and we will need you to double check the model so that we can assist properly with your question. Read More...
David December 04, 2017 for Model Number Gdt580smf5es How do I replace the striker latch on the dishwasher door?
1 Answer Hello David, You will need to remove the door liner to access the mounting screw for the striker latch WD13X10071. Read More...