John Dillon August 20, 2019 for Model Number GSD940M-20 My dishwasher leaks at the bottom of the door. I watched the video but noticed I do not have the piece that fits between the two ends of the gasket. I need the following: 1) the piece located at the center btm of door. 2) the gasket 3) the L & R baffles could you give me those numbers. thx John
1 Answer John D, Based on the model number provided there is not a piece listed on the part breakdown for a seal at the bottom of the door, there may have been one as a part of the inner door panel in which the manufacturer has discontinued and has not provided a suitable replacement for your model. The door gasket is part number [AP 2038861] and the two corner gasket are WD8X228 & WD8X227 Read More...
Ge Girl August 02, 2018 for Model Number GE Pot scrubber GSD720P re: leak from bottom of the door. Replaced both baffles and still leaking. Where is the lower spray arm? you indicated that sometimes this will cause the leak from the bottom of the door. How does that happen? thanks a lot...
1 Answer GE Girl, The lower spray arm would be loacted at the bottom above the pump assembly. Check for clogs or cracks. Also check to see if there is a seal at the bottom of the door that may be leaking. Read More...
Robert March 28, 2018 for Model Number GE dishwasher If i am standing looking at the dishwasher is the left side of the dishwasher on MY left ?
1 Answer Robert, Yes, if you are looking at the front of the unit the left side of the unit will be on your left. Read More...
Terri October 23, 2012 for Model Number GSD720X-73WB If the left and right corner baffle has desinagrated could that cause a slow leak?
1 Answer Hello Terri! Yes, if the tub corner baffles are defective it can cause a leak down at the bottom of the dishwasher . Thanks! Read More...
Jim R August 06, 2012 for Model Number GSD5330D01WW Do these attach to the door itself, or to the machine (door frame)? I laid mine into the corners loose, shut the door, and when I opened the door they are sort of stuck or attached to the door itself. Doesn't leak. What am I missing?
1 Answer Hello Jim. The tub corner baffles WD8X228 install into the tub assembly, not the door. They press into the slot at the bottom corners of the tub assembly. Read More...
R H January 09, 2012 for Model Number GSC800T01AD Re: Corner baffles: Do these need to be glued (silicone,other caulking, etc.)in for installation or just cleaned of old residue and fitted into place? Parts #AP2038859 and AP2038860
1 Answer RH, Your latter statement is correct. the corner baffles are a "friction" or "Snap" fit, They do not need to be glued or siliconed in. Thanks Read More...
A. M. October 07, 2011 for Model Number dishwasher corner baffle Hi. How do I change out this baffle? Is it as simple just to pull out the worn one and just replace? Is there any need to glue in in? Thank you.
1 Answer Hi A.M. Tub Corner Baffle - This is the left side corner baffle. For right side use AP2038859. Part Number: AP2038860 .Made by GE. They just pop off and on with a screwdriver. Thank you. Read More...
Stpatrick July 12, 2011 for Model Number gsc700x02wh Can a worn or defoformed tub corner baffle cause leaks?
1 Answer Stpatrick, Most leaks from the tub corners are due to a problem with the lower spray arm (split, cracked, clogged, etc.) or an overfill situation. But yes, the tub corner baffles will leak if they are damaged or deformed WD8X228 . Thanks and Good Luck. Read More...