Hideho July 16, 2015 for Model Number WM2016CW I need a new door boot gasket and am trying to figure out if mine has a drain port or not. It looks like the part MDS33059401 has a drain port that is " closed off" in your photo. So I looked at my current door boot and without removing the front of my washer to get a look inside I pulled back the outside of the gasket and I see a small hole at the 6 o'clock position, but when I tried to stick a pencil in it, it didn't go very far in (this is also the area covered in mold - which makes me think there is no drain port) Does this mean it doesn't have drain port? Is there any way to know for sure without disassembling my washer?
1 Answer Hello Hideho. You have to look at your old one on your unit and see if the drain is there or not. This determines which gasket you need to order. Read More...
Jeff May 31, 2015 for Model Number WM2016CW My Door boot Gasket has a small rip/slice ( about an inch) it it by the door handle side. I noticed it when taking it apart to replace the ball bearings. Should it be replaced ? What happens if not replaced? Thank you,
Tom September 05, 2014 for Model Number WM3360HWCA I need the door gasket for this washer....it leaks and needs to be replaced...Can I get the part # from you?
Juana M August 14, 2014 LG washer does not want to lock the door does this mean I need a door gasket?
Bruce February 09, 2014 for Model Number LG washer WM2050C Our washer makes a loud banging noise on the spin cycle.From what I have read I should replace the door gasket.Some people call it (noisey door sen-drum),is this true. The washer is level and on a solid service. Can you please help. Thank You
1 Answer Bruce, A faulty door boot gasket would not cause the washer to bang around during the spin cycle. Things that you will want to check is to make sure that the drum does not move up and down. If that is the case then the spider also known as tub support may be broken which would cause this issue. It could also be that the bearings are allowing the tub to shift. Also check the shocks to make sure that they are good. Read More...
Matt January 15, 2014 for Model Number WM3875HVCA Need a replacement door gasket. What is part number?
Sean January 08, 2014 for Model Number WM2016CW Is there an easy way to tell whether I need the gasket with the drain port or without, without disassembling anything?
1 Answer Sean, To tell whether your unit has the drain port or not just look into the bottom of the door boot and look for a hole that looks like a drain. Read More...
Tom December 14, 2013 for Model Number wm2016cw We have ordered a gasket through lg and when it was sent it was not the right one and they are saying that they no longer are makeing the gaskets for the older models do you have the proper one serial # 706kwre05718
1 Answer Tom, The door gasket that we are showing for your unit is part number MDS33059402. This may be the same part that came from the manufacturer as it has a drain hole on it. Read More...
Aaron S December 04, 2013 for Model Number WM2016CW I was about to install the Door Gasket Boot I bought from you guys on my LG washer, but I noticed the Boot you sent me has (2) tubes on top for I guess a Steam option that the old Boot I took off didn't have. Will this boot fit my Washer? And do I have to plug those (2) tubes at the top of it? Please let me know. Thank you, Aaron Salazar amcs@windstream.net
1 Answer Aaron, It appears that the correct part for your unit is part number for your unit is part number MDS33059401. Read More...
Todd October 23, 2013 for Model Number wm2016cw On part#ap4445705. I know there an outer clamp#2w20017e but is there an inner clamp I need?