Mike E July 19, 2015 for Model Number LG WM2032HW The dial on my LG 2032HW doesn't operate well anymore. However, the control board on has been discontinued (part number AP4439910). Can this be cross referenced and a different part ordered?
1 Answer Mike, Unfortunately with the control board 6871EC2025D having been discontinued, there would not be a suitable replacement recommended by the manufacturer. Read More...
Ed July 30, 2013 for Model Number WM0532HW Hi, I have an LG TROMM direct drive washer model # WM0532HW recently it will not spin out the water on the rinse cycle. I have a technician look at it and he said the problem was in the main power board. Do you think this is correct? The washer will still fill with water and will work on the agitation cycle but will not spin out the water. I have to drain it manually. thanks, Ed
1 Answer Hello Ed. It could be the main board. First check and make sure the drain pump is removing all the water. If not, then the pump is either bad or clogged and is causing the issue with the unit. Read More...
Josh May 12, 2013 for Model Number lg wm0532hw I have a LG WM0532HW washer that is diplaying a LE error code. I have ohmed out the wiring an they have continuity. Assuming it was the motor I replaced the stator. However I am still getting the LE error. The motor will not engage at all. The only other part I can think of that can be causing the problem is the PWB but I wanted to confirm my assumption prior to purchasing. I would appreciate some advice on what could be the problem causing this LE error on my washer. Thanks.
1 Answer Josh, In most cases the hall sensor 6501KW2002B is the failure that causes the LE error code. Read More...
Rosa C April 22, 2013 for Model Number WM0532HW My washer is giving me a PF code I restart the cycle but still not working.
1 Answer Rosa, The PF error code indicates a power failure. This might occur while machine is working due to an external disturbance like a storm or power outage in the area. If the PF error code is displayed, turn off the power to the washer, unplug it for 10 seconds, and restart the wash cycle. If this does not work then you may have a failure in the control board. Read More...
Robin M. March 07, 2012 for Model Number wm0532hw The Main PWB let out the magic smoke. I replaced the PWB and now the only thing that works is the power button. Did the PWB take out the display?
1 Answer Hello Robin. Test for power going to the PWB. If there is power there, and the display does not work, you will need to replace the PWB display 6871EC2025D. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Ken September 08, 2011 for Model Number wm2032hs I replaced the stator assembly, plugged in the machine and the PWB board started smoking. My board has many places to plug in the different feeds. On the green side of this picture there are no plug-in showing? This doesnt look right to me.
1 Answer Hello Ken. Based on the information you provided, it sounds like you may be looking for the Main PWB board 6871ER1023R. Hope this helps. Read More...