Brian August 01, 2015 for Model Number WM2101HW I got the te error code and replaced the heater element part number AEG33121501 still get te error code.
1 Answer Brian, With getting the te error, this would be a thermistor error in which you will want to check the wires to the thermistor and if they check ok then replace the thermistor for your unit. If the thermistor came with the heater and still the same issue and the wires check ok then the control board would be the issue. Read More...
Jbird27 July 30, 2015 for Model Number LG WM2501HVA Getting te error, pulled apart machine, thermistor apperars to be part of the heating element (late model). Can I just buy the thermistor for this unit, or do I need to replace entire heating element? Can you direct me to what part is compatible? Thanks
1 Answer Hello Jbird27. You will need to order the heater assembly AEG33121501 for the thermistor on the unit. Read More...
Susie June 15, 2015 for Model Number LGwm2050cm I need the wire that connects to the thermistor assembly. Which part is correct? And your video is very helpful.
1 Answer Susie, The multi harness part number 6877ER3003H should be the part needed that hooks to the thermistor for your unit. Read More...
Earl February 10, 2015 for Model Number WM2487HRM I need a wire harness that connects to the LG Washer WM2487HRM thermistor assembly. One of the wires has broken free from the connector. Thanks
1 Answer Earl, It appears that the harness that would connect to the thermistor would be the main harness for the unit. the part number is 6877ER1016F. Read More...
Greg S January 28, 2015 for Model Number LG Washer WM2240CW I need a wire harness that connects to the LG Washer WM2240CW thermistor assembly. One of the wires has broken free from the connector.
1 Answer Greg, The harness for the thermistor on your unit should be part number 6877ER3003H. Read More...
Connie January 20, 2015 for Model Number WM2250Cw I need the part number for the harness to the thermistor. One of the wires is broken.
1 Answer Hello Connie, I believe 6877ER3003C is the correct harness for the thermistor harness. Read More...
Phil December 11, 2014 for Model Number wm2016cw Fills with water runs to end of wash cycle stops (pauses) and does nothing else door is locked but will not spin or pump water out.
1 Answer Phil, You will want to check the door lock to make sure that the spin enable switch is good. If not then replace the door lock. If the door lock checks ok then the issue would be with either the drain or the control board. Read More...
Nicole November 14, 2014 for Model Number Lg wm2250cw Do you have a thermister for lg wm2250cw front loader washer?
Nicole November 14, 2014 for Model Number Lg wm2250cw Front load lg washer threw a Te error code a few months ago. I pulled It apart, wiring good. I pulled the thermister out wiped off then put back. The washer worked again. Now here I am again getting the same code and can't use my machine. Should I replace the thermister? I only use cold water. Wiring all looked good. It died in the middle of a cycle and was full of water and soaked clothes. It's barley 2 years old.
1 Answer Hello Nicole. Yes, you will need to replace the thermistor based on the error code you provided. Read More...