Customer Questions and Answers for Glass Cooktop Frame Assembly For Range by Samsung

Benoit, Unfortunately, at this time we do not show a parts list for this model range. You will want to contact your manufacturer for the part number.

Chuck, The part number for the cooktop frame assembly will be DG94-03730D.

Hello Milo, as per the Owner's Guide flat bottomed cookware should be used.

Hello Shannon, the main control board is part DA92-01199B however it is discontinued and no longer available.

Kathy, Here's some help : "Surface elements and Ceramic Glass Cooktop 1. Unplug the cord or disconnect power (you'll also want to slide the range out of the cabinet opening). 2. Open oven door and remove the 4 screws located at under the Control box. 3. Disconnect 2 wire harness connectors. Then remove the 2 screws. 4. Remove 2 screws at the Rear (Right, and Left). 5. Remove cover back main wire." Good Luck, and Thanks

Kirk, The basic instructions are " 1. Unplug the cord or disconnect power 2. Open oven door and remove the 3 screws located at the front of the cook-top, then close the door. 3 Slightly lift up and pull up the cook-top and then unplug the 2 connectors wire at the back by squeezing side tabs and unscrew ground wire. 4. Protect the cooktop surface and turn the assembly over. 5. To remove the surface elements a) Remove the wires from the element and limiter terminals. b) Remove the element bracket screw for the element you are servicing. c) Carefully lift the bottom of the bracket just far enough to remove the element. d) Use sharp tool to remove the heating element. REASSEMBLY NOTE: When you reinstall the element make sure that the wires are inserted into the correct tap then reinstall the bracket screw to secure it to the cooktop.*Reassembly of All part is the reverse order of disassembly.* Good Luck and Thanks,