Brian December 14, 2023 for Model Number NX58R4311SG/AA I am looking to change from natural gas to propane. Samsung says that the kit number is DG96-00750A which has 2 white, 1 yellow, 1 blue, 1 black, 1 green, and 1 none in the kit. I can't seem to find that particular part number anywhere but I can find part number DG96-00340B which seems to have the exact same colors in it. Are they the same or is it different size threads or something?
1 Answer Brian, as the manufacturer recommends the LP kit DG96-00750A for your model, we would not be able to recommend an alternative. Oftentimes, the BTU of the orifices or the amount of orifices will change from kit to kit. Read More...
Ur Wackyness February 08, 2023 for Model Number Samsung model# NX58J5600SG/AA Serial# OCY77DDM602546B Does anyone know what the output pressure a Samsung NX58j5600SG/AA 5 burner range pressure regulator is set to operate at from the factory for NATURAL GAS? I would "assume" it is 3.5 inches water column but you know what can happen when we do that...Thanks in advance.
1 Answer ur WaCkYnEsS, The range is designed to operate at a pressure of 5" (13 cm) of water column on natural gas or 10" (25 cm) of water column on LP gas. The pressure of natural gas supplied to the regulator must be between 5" and 13" (13 cm and 33 cm) of water column. For LP gas, the pressure supplied must be between 10" and 13" of water column. Read More...
Ur Wackyness February 01, 2023 for Model Number Samsung model# NX58J5600SG/AA Serial# OCY77DDM602546B Am trying to go from PROPANE back to NATURAL GAS on this Samsung 5 Burner Range...I know Samsung does not sell a kit but makes you buy the burner cups with the orifices already installed at over $400 (insult to customer)...I know that the LP orifices that are in it now(or a new $2 blank orifice) can be drilled out to the correct hole diameter because the Natural Gas orifice hole is larger than the LP Gas orifice hole...I also know somewhere...somebody has access to the INFORMATION OF THE ORIGINAL NATURAL GAS SAMSUNG ORIFICE HOLE DIAMETERS FOR EACH BURNER...that it originally shipped from the factory with either listed in a service/repair manual of some kind...OR...because they actually measured them and wrote it down...OR...somewhere...someone has the old ones they took out and can share the numbers STAMPED on the orifice (or pictures)...OR measure them with a numbered drill set and post the information here for the BENEFIT OF ALL MANKIND) (or at least the ones with the same problem) thus becoming a hero to all us being ripped off by Samsung
1 Answer Ur Wackyness, We do not have the hole size or the number on the orifice but we do have the BTU information that you may be able to take to a gas supplier and they may be able to match the orifices you need. The Right front burner is 17,000 BTU, the Right rear is 5,000 BTU, the Center Oval is 9,500 BTU, the left rear is 9,500 BTU and the left front is 15,000 BTU, the broil burner is 13,500 BTU and the bake burner is 18,000 BTU. Hope this information helps. Read More...
Bradley July 07, 2022 Can you tell me the size of the orifice for the left rear (white) insert? Do you have just that part? I just need that one, not the whole kit. Thanks much
1 Answer Bradley, if the model number of your appliance could be provided in a new post, this will allow the most accurate information to be presented. Read More...
Jim June 26, 2022 for Model Number NX58H5600SS/AA I'm looking at Assy Lp KIT;NX58H5600SS, DG96-00340B / AP5917476 to convert my range to propane. I can't read the instruction sheet to see what size orifices come with this kit and want to be sure they are what I need. Can you send me a scan of that sheet, or at least tell me what sizes are included? I bought a kit from another vendor and three of the orifices were the wrong size. Thanks
1 Answer Jim, the manufacturer lists the LP kit DG96-00340B for the model provided and it includes the orifice sizes 102, 115, 098, 106, 062, and two 083. Read More...
Cara January 03, 2022 for Model Number Nx58f5700ws Can you help me find the lp kit for this model I can not seem to find one available DG96-00337A
Cara December 13, 2021 for Model Number Nx58f5700ws Please tell me which lp conversion kit I need for this stove.
Jason September 13, 2021 for Model Number nx58h5600ss im looking for the orfices to go from PROPANE back to NATURAL GAS and can not find rthe orifice kit anywhere. Any assistance would be greatly appreciated.
1 Answer Jason, There is not a natural gas orifice kit and you will need to replace the burner cups left front DG62-00058A, left rear DG62-00059A, right rear DG62-00060B, right front DG62-00082B, and center DG62-00090A. For the oven you will need the bake burner fitting DG94-00548A and the broil fitting DG94-01436A. Read More...
David June 11, 2021 for Model Number NX58R5601SS Hi I am hopefully going to buy a used Samsung range. What LP conversion kit do I need for this model?
Travis April 05, 2021 for Model Number NX58T7511SS What Lp conversion kit do I need for a NX58T7511SS? Samsung says DG96-00340c But I can only find dg96-00340a and dg96-00340b available
1 Answer Travis, Based on the model number provided the LP kit the manufacturer supplies is the DG96-00340c. Our part number DG96-00340C Read More...