1 Answer Hello Mikayle, thank you for contacting Appliance Parts Pros. Your model # is most likely WF45K6500AV/A2.11. Read More...
Scott June 20, 2022 for Model Number WF448AAW/XAA I'm replacing the spider arm and the rubber tub seal. Is there any grease or lubricant applied to any surfaces during reassembly? Like the tub bearing or spider shaft? Our tub had a dirty greasy film on it that cleaned up with Dawn.
Bipin August 21, 2021 for Model Number WF448AAW/XAA I need tub seal and bearing part number DC62-00156A and Bearing 6601-001207/1208. If the bearing is not available, Please, let me know the replacement kit. Thank you Bipin
1 Answer Bipin, unfortunately, the bearing 6601-001207 has been discontinued by the manufacturer and is no longer available. However, the rear tub assembly DC97-14604D can be used with the model provided. Read More...
Rick March 19, 2021 for Model Number wf56h9100aw/a2 My Samsung front load washer appears to need bearings and a seal. The model # is WF56H9100AW/A2. I noticed your seal part is followed by additional digits and some fit the part that I am considering and others don't. If there are no trailing number would this identify this model as the one that ends in zeros only? If it is, I'd like to replace the bearings while I have the washer apart. Can these be repacked or replaced? Some parts sites indicate I have to buy the entire rear tub assembly. Thanks.
1 Answer Rick, as the bearings for this model are no longer available separately, the rear tub assembly DC97-18247A would be replaced to repair the bearings and seal. If there is not a set of numbers following the model, it is a good general rule to consider it a 00 series. Read More...
Hung Phan December 02, 2019 for Model Number Samsung front load washer WF50K7500/AV I am looking for inner drum spider arm with bolt and bearing kit and rear tub seal kit for model I provided or any suggestion for that. thank you so much. Is the Tub Seal #DC69-00804A fit samsung WF50K7500AV or any one can fit that model.Thank you so much
1 Answer Hung Phan, several of the individual parts you need have been discontinued by the manufacturer [6601-003009] ball bearing, [6601-003008] ball bearing, and the "spider" assembly, they have been replaced by assemblies, that contain the individual parts you need DC97-19268A / DC97-19268A Assy DRUM; WF50K7500AV, DC97-19681A DC97-19681A Tub rear, DC62-00156A / DC62-00156A Tub Seal/Gasket, DC60-40137A Spider Bolt (6 reqd.). The tub seal and the spider bolts wouldn't be needed as they would come with the tub assemblies. Thanks, h Read More...
Kevin February 09, 2019 My samsung washer model WF338AAW/XAA is in need of repair. It looks like there are three (3) bearings in the back of drum, but videos say there are only 2. One turns easily, one is locked up, and a third is iffy.
1 Answer Kevin, For this issue the rear tub DC97-12957A would need to be replaced. Unfortunately this has been discontinued by the manufacturer with no suitable replacement available. Read More...
Robert December 17, 2018 for Model Number WF431ABWXAA Can I order the inner and outer tub bearings only? Also would need tub seal and rear tub seal.
1 Answer Robert, The part number you would need for the rear bearings will be the rear outer tub part number DC97-14604D. Read More...
1 Answer Kimberly, if you manually turn the tub basket, does it roar or make a grinding noise? If so, the bearing is bad and would need to be replaced. Read More...
Mike December 04, 2017 for Model Number WF461ABW/XAA Can I just purchase drum bearings with out tub. I found seal and tub seal. Thanks Mike
1 Answer Mike, Unfortunately the drum bearing is not available separately and you will need to get the tub part number DC97-14604H. Read More...
Charles January 06, 2016 for Model Number WF431ABP/XAA-0001 Can the rear tub bearings alone be replaced, or does the entire rear tub part need replaced?
1 Answer Hello Charles. Sorry, you have to order the outer tub DC97-14604D to replace the bearings in the unit. Read More...