Bob November 07, 2013 for Model Number medb800vq0 Mt thermo fuse keeps blowing on this maytag dryer. Dryer runs hot even on air fluff. A appliance guy told me to check my heating element. Says it is more than likely grounded, causing it to not cycle on and off. Any truth to that. I thought if element goes bad you have no heat
1 Answer Hello Bob. Check and see if the blower wheel is wrong and if the vent is clogged on the unit. Either will cause the issue you are having with the unit. A grounded element can cause the issue as well. Read More...
Eric B July 28, 2013 for Model Number WED9400SU0 My electric dryer keeps blowing thermal fuses and dryer gets really hot prior to blowing the fuse. The heating element stays on even though the unit is on "air dry".. The technician says it is the main control board. What do you think?
1 Answer Eric, Yes this issue would be in the control board. Relay sticking causing the heater to stay on. Read More...
Scooter June 06, 2013 for Model Number Dryer # WED9400SU0 What is the difference between these two boards? W10110641, W10174745
1 Answer Hello Scooter, These two boards are designed for two different wiring configurations. They are not interchangeable even though they look similar. This is all of the information we have available on them so if further information is required, I would recommend to contact the manufacturer. Read More...
Dan S December 11, 2012 for Model Number WGD9400SW2 I also get the F70 code constantly. Does my model also take the Main Control Board # W10110641? And where is it located? Thanks
1 Answer Hello Dan, Check your wiring connections between the machine control and the user interface. If connections are ok then you would would want to replace the main control board WPW10174745. Read More...
Ashley D. October 25, 2012 for Model Number WED9750WW0 My dryer will only run for about 5-10 minutes, then it stops and F70 starts flashing on the display screen. This first happened about 3 months ago and my husband flipped the breaker off for a few minutes then back on and it started working again. Up until a few days ago it would dry for the entire selected time, but now it had started doing the same thing as before. Can you please tell me what i can do to fix this? Sincerely, Ashley D.
1 Answer Hello Ashley, The error code that you are seeing F70 indicates a communication error between the machine control and the console electronics. What you need to do is check the harness connections at the machine control and console electronics to ensure that there are no loose connections. If there are no loose connections then you would want to replace the machine controlWPW10110641. Read More...
Starla December 27, 2011 for Model Number whirlpool duet steam dryer bought 3yrs ago Hi I have googled my problem and see that several people have had this problem but I have no concret answer. I sometimes loose the display light and it beeps several times and stops. I also have been getting F70. Do you know what I need to do to fix this or what the problem even is? I bought it 3 yrs ago.
1 Answer Hello Starla. Check and make sure there are no loose or broken wires inside the unit. If not, you will need to replace the electronic control WPW10110641 based on the information you provided. Hope this helps. Read More...
Buff December 08, 2011 my dryer duet has the sensing light is on it will power up but when you hit the start button it will not come on. checked and cleaned the dryer even checked the voltage coming into the home need help
1 Answer Buff, Is there an "E" code in the display ? If you press in on the door switch, can you hear a click noise, when you press and release the button ? Can you supply us with a Model number, so we can direct you more efficiently, please. Thanks Read More...
Russ September 21, 2011 for Model Number wed9200sq0 Dryer quit working. Now has f01 code flashing in digital screen. I tried to unplug and replug to no avail.
1 Answer Hi Russ. Is the door unlocking? You can remove the top and find the tech. Sheet inside. Select pause/cancel twice. If it remains on the display it refers to the control board part # is WPW10110641. Thank you. Read More...
1 Answer Hello. We will need to know the problem and the model number of the unit. Thanks. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Tom J August 25, 2011 for Model Number w10110850a Hi, I bought this dryer 2 years ago at yard sale. It's worked great until yesterday f 70 code popped up and it wont start. I cleaned the lint trap and put new duct on to no avail. What do I have to do to fix or reset it? Thanks.