Don F October 31, 2011 for Model Number Maytag MDBTT79AWB I just need one convertible lower tine. The kit, part no. AP4010256, has additional tine and latches I don't need. Can I buy just one tine?
Bill C. October 07, 2011 for Model Number mdb9750awb This unit is about 6 years old. Works great, but parts need replacing. Need flip tines for both dishracks (upper and lower). Don't see the parts on the website. The flip tines kit shown does not match my current parts. Please advise.
1 Answer Hello Bill! The tines listed for the middle rack have been discontinued with no replacements available. For the upper rack use WP99003496 for the right and left side tines. For the fold away tine pivot use WP99002709 and for the fold away tine latch use part number WP99002710. Thanks! Read More...
Melanie B. August 21, 2011 for Model Number GU1500 I need taller tines for bottom rack. New dishes won't stand up.
1 Answer Hello Melanie! Unfortunately, we can only suggest the tines that came equipped with the appliance from the manufacture. We are not able to suggest any other tines. Sorry. Read More...
Colin April 13, 2011 for Model Number mdb8600aws How do you install the part? Are there instructions?
1 Answer Colin, No there are no instructions, it's not that hard to do. the tine retainer has a "clip" in one end and an open slot in the other. you snap the clip end onto the bottom rack rung and the slotted open end onto the corresponding rack rung, also make sure the cover in the middle of the retainer is coverring the opposing bottom rack rung. Insert the tine assemblies in the round openings on the upper area of the retainer, with the "hooked" end of the assembly in the flexible opening on the opposite side of the retainer, with both tine assemblies installed in the first retainer install the remaining retainer on the rack. We hope this was helpful and Thanks Read More...