Jesse P. February 22, 2012 for Model Number kera205pwh4 (kitchenaid) I receibe part# AP3045954 -surface element and I need to replace,please tell me how to do it. Thanks Jesse
1 Answer Hi Jesse. Remove power. Open the door and lock the door hinge for removal of the door. Once removed you need to remove the front outer Lt and Rt. top screws. Look up uner the front corner overhang edges. Remove the 2-opossing screws and lift the top up. Support the top with a stick or handle. Mark the underside of the old burner screws that are numbered w/ a felt marker. Note the exact wire connections placements. Use a cell phone if needed for pictures. Thenuse a magnifying glass to identify the burner contact letters or numbers. Use the supplied wiring diagram behind the control panel or folded in a packet on the inner lower frame. You will find it after removing the lower drawer. The burner is part # W11171119. Thank You. Read More...
Jesse P February 21, 2012 for Model Number kera205pwh4 How to replace part# ap3045954 . The surface element that i bought from you. thanks .....Jesse Perez
1 Answer Jesse, Here are the basics, Your unit may be slightly different. " 1. Turn off the electrical supply to the range. 2. Open the oven door and remove the screws from under the front of the maintop, then close the oven door. 3. Slide the maintop forward as far as possible and remove the ground wire and main harness strain relief from the rear of the maintop. 4. Lay a protective covering between the maintop and the range to protect the finish, then turn the maintop over and lay it on the covering so that you can access the components. 5. Remove the two screws from the bracket of the hot surface indicator light. 6. Remove the screws from the element retaining brackets, unhook them from the maintop, and remove them. 7. Clean the bottom glass of the new maintop and remove any debris." Good Luck and Thanks Read More...
Debbie February 08, 2012 for Model Number mer6755aas26 Maytag oven and range free standing cook top. Back right burner not working. Researched the part and came up with 8273994 and it seems to be the part for the front burner rather than the back burner. Please help need to order the correct part. Also how to install instructions would be helpful.
1 Answer Hello Debbie! The right rear burner element is part number W11171119. Here are install instructions from our repair forum, thanks! http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/85466-wiring-pattern-differs-replacement-burner.html Read More...
Tony M. January 24, 2012 for Model Number rf368lxmso Right front burner- which part number do I need?
Pam A. May 01, 2011 for Model Number RF362LXST0 How can I be sure that this is the right element? Right front surface element.
1 Answer Hello Pam. For the right front element, you will need to order W11047722, according to the model number you provided. Hope this helps. Read More...