Mike September 05, 2015 for Model Number KUDS30FXSS0 Does the gasket for the float assembly go inside the dishwasher between the nut and tub or underneath between the float assembly stem and the tub? Thanks
1 Answer Hello Mike, This gasket WP8531323 goes on the inside of the tub directly behind the nut WPW10213825. Read More...
Will B. June 26, 2011 for Model Number KUDA230YWH2 I have a kitchen aid superba dishwasher and have a problem with water leaking out below the overflow protection float. When the dishwasher is functioning water comes out below the float which is moving up and down. The water comes out and runs over the bottom where the switch. Is the float that needs to be replaced or would replacing the gasket part number AP3181006 be a better solution? How do I get the float off and get the gasket replaced?? Thank you, will Brucker
1 Answer Will, first thing to check, the lower spray arm, make sure it is not blocked by debris in the nozzle openings(on both sides top and bottom), check all the seams, on all the arms for splits or cracks. Make sure the thumb screw is tight when you reinstall the arm assembly(some"wobble" is normal). And make sure the dishwasher is level in both directions(front to back and side to side). Thanks and Good Luck. Read More...