Todd October 23, 2014 for Model Number MER6751AAW I need to order the lower door handle. The one I am replacing has grey caps on the handle ends where it attaches, does this one as well?
1 Answer Hello Todd! No, the door handle WP74011675 is all white in color. This is a manufacturer replacement part and may differ in appearance but is a functional equivalent to the original. Thanks. Read More...
Paul S March 16, 2014 for Model Number Jenn Air Oven w131w The end caps that secure the handle to the oven door are old and chipped. I would like to replace them but they are not available anywhere (this is a pretty old oven). Do oven door handles come in standard sizes? Could I just purchase another entire handle and replace my existing one? It seems that so long as the length were the same, this should work. Any thoughts and recommendations?
1 Answer Hello Paul! No, the handles do not come in standard sizes. Unfortunately, the end caps Y704454, have een discontinued with no further replacements or cross references available and our company is unaware of any other available sources. Sorry about that! Read More...
J.Milton July 29, 2013 Model: MGR4452BDW Serial: 16493359NE My door handle broke where the screws attach to the handle. This is the smaller plastic part that attached to the handle itself on both sides. I understand from previous question/answer that I must purchase the entire handle to repair my gas range. When I purchase the handle (#1) do you send all the hardware necessary to attach the new handle to the range door or do I need to purchase additional hardware (screws and such)?
1 Answer Hello J.Milton. If the screws are missing, you will need to order them. They do not come with the handle. Read More...
Brandon July 26, 2013 for Model Number 74011675 Hi - oven door handle arrived yesterday but without any of the screws or clips required to attach it to the door. do you carry those parts?
Jonboy August 01, 2012 for Model Number merh752baw My door handle broke where the screws attach to the handle. This is the smaller plastic part that attached to the handle itself on both sides. Can I get this part without having to buy the entire handle? This seems to be a common failure on this handle as the matching microwave broke at the same place. The Serial Number is 13460076JL. Thank you in advance.
1 Answer JonBoy, the part is not available separate from the handle assembly part number WP74011675. Sorry about that! Read More...
Fred January 25, 2012 for Model Number mgr4451bdw Instructions on how to remove my old handle and install the new one without breaking the door or handle any further
1 Answer Hello Fred. To change the handle WP74011675 in an oven door, you will need to determine how to remove the door on the model number you are working on. If you open the door to the first stopping point, some oven doors will lift off the unit in this position. On other models, you will see clips on the back of the hinge toward the opening where the hinge enters the range. If yours is like this, you will open the door all the way open, then pull the clips down until they stop and lock in place. Then close the door to the stopping point and lift the door off the range. If you door does not lift off, and it does not have the clips, then you will open the door all the way open. You will see a hole in the hinge at the bottom of the door. You will insert a pin or nail into that hole and close the door to the stopping point. Then you can lift the door off the unit. Once the door is removed, you will lay it on a soft surface and disassemble the door. Pay attention and make notes if needed for reassembly of the oven door. Once you have replaced the handle, you will reinstall the oven door back onto the range in reverse order of the way you removed it. Hope this helps. Read More...
1 Answer Hello Renata. The handle WP74011675 will work for either series 10 or 13. Hope this helps. Read More...
Larry M. July 14, 2011 for Model Number MGRH752BDW The front door handle on my gas stove got broken where the screw attaches to the plastic screw hole in the rear of the handle. Will I or can I get a new mounting including all screws and/or plates to reattach to the oven door? Also will I get instructions to preform this installtion with the new door handle?
1 Answer Hello Larry! May we have your appliance serial number? We will need this to determine the correct parts as there is a series change. Thanks! Read More...
Michelle May 31, 2011 for Model Number mgrl752bdw Is it possible to buy the copper part the screw goes into that fits in the door handle?
1 Answer Hello Michelle! If you are speaking of the insert on the handle that the screw screws into, it is not available separate from the handle. Your handle part number is WP74011675. Thanks! Read More...