Bob October 11, 2013 for Model Number DU1148XTPBB So I need the drain hose that goes from the bottom of my unit to my sink drain fitting. Appox 6 or 7 feet 3/4 OD and looks like this one. Plastic fitting flanges kinda and the black rubber on the other end. This looks like the one on the unit itself. I'm having a hard time finding this hose. Don't want to cut one and put a bunch of clamps that will leak. help!! thanks
Tim L. September 29, 2013 for Model Number GU2400XTPT1 I need a new drain hose. There is a 90 degree rubber elbow at the front end of the existing hose. Also, there appears to be an anti-siphon valve inside the connection between the elbow and hose. Finally, the hose connects to another plastic hose with what appears to be a rubber adapter at the back. The other hose goes to the drain. Can you tell me the correct part number or parts numbers? Thank you.
1 Answer Tim, the drain hose with the 90 degree elbow is part number WPW10358302. Thanks! Read More...
Ed September 24, 2013 for Model Number mdb7749sbm on part no ap4399659 what is inside demention it is a drain hose for a maytag dishwasher
1 Answer Ed, the ID (inside diameter) of a 7/8 inch OD (outside diameter) dishwasher drain hose is 3/4 inch. the OD at the rubber connector on the end of the hose is 1 inch, with an ID of 7/8 inch. Read More...
Larry August 06, 2013 for Model Number KitchenAid KUDR24SEAL2 My leaking drain hose appears to run from the pump, up around the top rear of the machine and then down to the drain pipe. Does it have to run that route, or can it be coiled under the machine and attached to the drain, to avoid having to pull the machine part?
1 Answer Hello Larry. It has to run that way to create an air gap so the unit does not siphon out. Read More...
Pat July 21, 2013 for Model Number 665.13412K701 Is this the entire drain hose? The one currently on there has a 90* elbow right at the bottom of the sump, plus I see there are other drain hoses listed as parts for this model. Thanks.
1 Answer Pat, according to your appliance model number the replacement drain hose is part number WPW10545278. Thanks! Read More...
Al June 02, 2013 for Model Number 66515937000 The original drain hose on my dishwasher had a small one way "flapper" valve in it. The replaceement one does not. My dishwasher ends up with water in it. Do I need a hose with that back flow device in it?
Kim March 01, 2013 for Model Number RS22AQXKQ00 We need to replace a coupler piece. Its about 1-1/2 long has red end and a blue end. In our manuel its worded as Water Dispenser Tubing Connection. Do you know what part number this would be? The fridge is 11yrs old would the piece look different?
1 Answer Kim, The part that you would need is a reducing union which takes tubing from 5/16" to 1/4" which is part number WPW10334458 Read More...
Lucy Lucy February 21, 2013 for Model Number wdt710paym The drainage hose provided with the dishwasher is about 5"-6" short. I do not want to pull the dishwasher out and replace the hose with a longer one. It took the plumber and I a long time to push it in, position it right and secure it. Is there an extension hose that I can purchase and connect? If there is, how do you join the two hoses? If it's 6' long, isn't that too long?
1 Answer Hello! Unfortunately, the manufacturer does not offer an extension kit. The 12' drain hose is part number 3385556. Thanks! Read More...
John March 10, 2012 for Model Number 8269144 My hose burst a while back. I think this was due to rubbing in the hole where the hose passes through the cabinet. Is there a similar hose I can use which is made of a sturdier material?
1 Answer John, the manufacturer does not offer any other hoses that cross reference with the drain hose 8269144A. They only offer stainless fill hoses. Sorry about that! Read More...