Conway July 23, 2016 for Model Number ED2VHEXVQ00 Does the ice maker replacement that you show come with a new ice mold? I just wanted to make sure before I order one.
Conway July 23, 2016 for Model Number ed2vhexvqoo The ice maker in the video I watched for this model number doesn't look like the one in my kitchen. My refrigerator is about 9 years old. Does that make a difference? I don't want to order the wrong part.
1 Answer Hello Conway. No, the icemaker video is used for many different models and may not be model specific. Read More...
Long March 26, 2016 for Model Number ED5KVEXVQ00 Can I replace the icemaker unit with W10190965? The original in my refrigerator is W10190966. Thank you. Best Regards,
1 Answer Long, Yes the icemaker WPW10190965 is the direct replacement part for your unit. Read More...
John M March 24, 2016 for Model Number W10190965 (AP4360346) The icemaker is hard wired to the refrigerator. Was unable to replace the existing wiring but replaced the ice maker unit. Will this affect the operation of the icemaker?
1 Answer John, No it will not affect the operation of the icemaker with not replacing the wiring harness that is built into the unit. The icemaker should work fine. Read More...
Ron March 22, 2016 for Model Number ED2KVEXV001 How do I adjust ice maker to make whole cubes of ice?
1 Answer Hello Ron. If the cubes are hollow, you will need to check and see if the freezer is to cold. It should be 0 to 5° to make proper ice cubes. Read More...
Randy February 23, 2016 for Model Number 106.56612500 My ice maker is a part# 626662 can I replace it with a part# 4317943
Tony January 04, 2016 for Model Number kenmore 10657412600 Ice maker not doing anything..i feel around it seems theres ice in it but i guess its not ejecting it...do i just replace with W10190965?
1 Answer Hello Tony. Make sure the freezer is between 0° and 5°. You need to check and see if there is power going to the water valve when the icemaker cycles. If so, replace the water valve on the unit. If not, or the icemaker does not cycle, you will need to replace the icemaker on the unit. Also, check and make sure the fill tube on the unit is not frozen and clogged. If so, replace the water valve and thaw out the fill tube. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
John November 12, 2015 for Model Number 106-56622500 DOES IT HAVE A CUBE SIZE ADJUSTMENT & WHERE, HOW MUCH TURN IT TO ADJUST HIGH OR LOW?
1 Answer Hello John. Yes, on the side of the module is a small white plastic screw. Move it very little to adjust cube size. A little is a lot. Read More...
Kat November 05, 2015 for Model Number 106.55244400 #W10190965 Does this part come "with" the module (626662) (Ap4360346) attached or is this just the ice tray
1 Answer Kat, Yes the W10190965 / WPW10190965 Ice maker is a "complete" assembly. You will need to transfer the "bale"/auto shut off arm from the original ice maker, but everything else needed will be there. Read More...
Jim N. October 07, 2015 for Model Number 106.51103110 Is there a water level adjustment on the ice-maker? If so, where is it?
1 Answer Hello Jim. Yes, on the side of the module is a small white plastic screw. Move it very little to adjust cube size. A little is a lot. Read More...