Irene August 31, 2015 for Model Number IM#MMAP106W10122507 The metal part of the tray is corroded and the plastic that covers it is eaten away. If I purchase a complete kit will I be replacing the entire ice maker? Or do I need to keep the old for parts?
1 Answer Hello Irene. This is the Icemaker only. It is recommended that you use parts off the old icemaker. Read More...
Don June 29, 2015 for Model Number 106.55128700 Is this the right ice maker part number for this appliance?
1 Answer Hello Don, The icemaker listed by the manufacturer for the model you provided is WPW10190965. Read More...
Mike June 25, 2015 for Model Number ED5KVEXVB01 My icemaker wont dump ice so I think its the motor module but for the price was going to buy new icemaker from your company but when I watched video on how to replace it as I was looking at my fridge my plug only plugs into back of module wires on other end comes out of wall of freezer wall no plug in to change will replacement icemaker fit my existing plug because I have no way to use other plugs that come with it . Help I need ice ready to order hot down down here in Bama these days lol thanks mike
1 Answer Hello Mike. Yes, you will unplug the connector from the icemaker head and plug your old harness into the head of the new icemaker. There is a clip behind the cover that releases it from the head. Read More...
Randall February 26, 2015 for Model Number ED5GVEXVD02 Does this icemaker come with the harness? What parts off the old icemaker do I need to use?
1 Answer Hello Randall! This is the icemaker only. All parts must be reused from the existing icemaker. Thanks. Read More...
Ronald R. February 22, 2015 for Model Number Whirlpool ice maker 626633 Water will not fill ice maker, when I jump the water valve out the water valve works. I jumped the ice maker cycle out and it worked through cycle but still no water
1 Answer Ronald, Attach your meter leads or test light to the wires for the ice maker solenoid and cycle the ice maker again, you should read 120 VAC across the wires when the rake arm reaches the 1 to 2 o'clock position. No voltage would indicate a broken wire from the freezer wall to the fill valve or a damaged fill contact in the ice maker control module. Read More...
Mike January 17, 2015 for Model Number Estate TS22AFXKQ05 My ice maker is dripping water into the ice bin. I don't see any cracks in the ice maker or fill tube. It still makes ice, but the bin freezes.
1 Answer Hello Mike, This will be either the water valve W10408179 overfilling the icemaker or the enamel coating of the icemaker 4317943 has a crack in it. Read More...
1 Answer Charlie, To remove the dispenser housing you would remove the drip tray from the dispenser. Once removed you will see 2 screws and will need to remove them. Once removed you can remove the dispenser cover. Read More...
Bk Lee December 29, 2014 for Model Number Whirlpool oven door gasket 3179813 Whirlpool oven door gasket 3179813 is no longer available. Any suggestions on available gaskets that might work on my Kitchen Aid oven KEBS177WBL3?
1 Answer BK Lee, Unfortunately the manufacturer has discontinued the oven gasket for your unit and there is not a suitable replacement available. Read More...
Steve December 17, 2014 for Model Number 626662 Do you sell the control module only? Price? Availability?
1 Answer Hello Steve. On some models you can order just the module. However, it is always recommended to replace the icemaker assembly on the unit. Read More...