Cliifton September 08, 2022 for Model Number GW397LXUS06 Front right burner ignitor only sparks about 30% of the time when trying to light. I purchased replacement iginitor from whirlpool. I removed burner cap and head. The ignitor is still not accessible to change. Does/how cooktop need to be removed to replace? Thank you.
1 Answer Clifton, To gain access to change the igniter you will have to remove all the burner heads and caps. Once removed you should be able to lift the main top to access the orifice holders which hold the ignter. Read More...
Joe May 15, 2022 for Model Number MAYTAG Range Model MGR5755QDW I need the right Top Burner Spark Igniter for my stove, can you tell me which is the right one?
1 Answer Joe, the top burner igniter WP74009958 would be used for the model number provided. Read More...
David August 08, 2020 for Model Number GW399LXUS1 My oven takes about 1/2 hour to get to temperature. ( 350, on bake ) I just wanted to confirm that I will need a new main igniter, part # 74007498? I am thinking the broiler igniter is not the problem? Thanks for your time. David
1 Answer David, based on your description and information, the oven bake igniter 74007498 / 74007498 Ignitor (Bake/Broil) would be the best place to start, A weak igniter could operate erratically and cause the burner to take longer to ignite the burner. Thanks, Read More...
Dale March 12, 2020 for Model Number Maytag MGC5430BDS One of the igniters on the 4 burner cooktop has a broken ceramic tip. The other 3 work fine. What is the part number for the replacement igniter?
Douglas June 09, 2018 for Model Number JGR8875RDB Three of the top burners spark and light. Only one does not spark. We have to light it manually in order to get it to work. What part will I need to fix it? It is the largest burner on the right front. Thank you
1 Answer Hello Douglas, If none of the burners spark when turned on you will need to order WP74010753. If the others spark but the one does not you will need to order the ignitor harness W10173438. If it actually is sparking but not lighting you will need to use a safety pin or small paper clip to run through the orifice to clear it and no parts would be necessary to correct the issue. Read More...
Mikey May 26, 2013 for Model Number Mgr5765qdw I only get ignition to all the burners when I use the front left burner then the ignition works on all the burners if I turn any of the other 3 burners I will not get ignition thank you mike g
1 Answer Mikey, You most likely have a faulty spark module 74008821, The likely hood of more than one igniter switch being faulty is pretty remote, but possible, unless there's some obvious damage. Read More...
Ron February 12, 2013 for Model Number agr5725sds My broiler burner does not work what would cause this the stove is 5 years old but it has not worked since about the first year of use.
1 Answer Hello Ron, You will want to check your broiler ignitor. You can do an amp draw and should have 3.2 to 3.6 amps. If the amp draw is not within range then you would need to replace oven ignitor 74007498. Read More...
Whizzkidd January 27, 2012 for Model Number mgr5755qdq LEFT FRONT BURNER WILL NOT LITE . NO SPARK FROM THE IGNITER. HAVE REPLACED THE IGNITER( #AP4099080) . IT IS JUST THE ONE BURNER THAT IS A PROBLEM.
1 Answer Hello Wizzkidd. Based on the information you provided, it sounds like the spark module 74008821 is bad and will need to be replaced. Hope this helps. Read More...