Joseph May 21, 2015 for Model Number Amana NFW7200TW I have the Amana washer NFW7200TW. The plastic door strike is split. Your part AP4044741 looks to be the exact part I need, down to the color according to your pictures. However, I am wary, because I have already ordered this same part (#34001260) from 3 different companies (all used the same pics as yours), and what I got was something similar- dark gray door strike with raised bevels (almost like 2 raised edges). They do not fit correctly and do not lie flush when closed. Therefore, the locking mechanism doesn't properly close the door. I am about to go insane! Can you definitely guarantee your part AP4044741 is the one in the pic- light cream color?
1 Answer Jospeh, the door latch, WP34001260, is gray in color. According to the model number given this is the original latch and should work on your model with no issues. Thanks. Read More...
Ben March 23, 2015 for Model Number Samsung Washer WF331ANW The door latch is broken. Specifically its the female receptor the door connects to. The plastic bits have disintegrated. What is the part number for this.
Tom March 02, 2015 for Model Number nfw7200tw Door drops on right, like hinge is weak. Does hinge adjust??
1 Answer Hello Tom. No, if the hinge is dropping, you will need to replace the hinge WP34001429 on the unit. Read More...
Theresa W October 05, 2014 for Model Number MAH8700AWW FRONTLOADER Just bought the machine, everything came on great & seemed to go thru the motions as it should. Then it was time to get the laundry out, the door wouldn't open it still hasn't opened. What can I do to fix this problem?
1 Answer Theresa, You will need to remove the top cover of the washer and with the cover off and power disconnected, Reach down where the latch assembly is and there will be a tab toward the bottom that you can pull on which will release the door lock assembly. The door lock assembly will most likely be the cause of the unit not unlocking the door. Read More...
Ted August 04, 2014 I just bought part # 34001260 striker but after installing it the door catch will not let striker set and keep door shut. Looking at latch it looks like the lever should move down then come back up to keep door closed.
1 Answer Hello Ted. It sounds like the door lock is bad and will need to be replaced on the unit. Read More...
John May 22, 2014 for Model Number NFW7200TW Amana The plastic latch on my washer door has broken and now the door will not lock. What is the replacement part for the latch?
1 Answer John, the replacement door latch is part number WP34001260. The lock is part number WP8182634. Thanks. Read More...
Laura March 04, 2013 for Model Number WF350ANW Hi, The part attached to the washer where the door male part goes into is broken. What do I buy to fix this broken lock part? Thanks
1 Answer Laura, The part you'll need is the latch/switch assembly WP8182634, The latch is located on the inside of the front panel. You will need to remove the top panel, control panel, remove the boot from the door opening, then remove the screws holding the panel at the top bracket and lower cabinet, then disconnect the wiring from the latch assembly, and remove the front panel. Read More...
Sherryjones February 12, 2013 for Model Number Samsung Front Load Washer WF218ANB Looking for the door lock. Am I looking for a door lock assembly or just the lock?
Danny November 14, 2012 for Model Number wf431apb The plastic part that the lock on the door goes into on the washer is broken, do you have that part?
1 Answer Danny, found model number WF431ABP (p and b reversed). The door strike/lever is part number DC66-00375A, this strikes into the door lock DC64-00519B. Thanks! Read More...
David August 25, 2012 for Model Number Amana # NFW7200TW I replaced the broken door strike and now the door will not close. It's like the door lock is engaged.
1 Answer Hello David. A piece of the broken strike is jammed inside the door lock assembly WP8182634. Either remove that piece or replace the assembly on the unit. Read More...