Tom December 22, 2013 for Model Number maytag MAH6500AWW ? AP4028180 Made by: Whirlpool Is it possible to repair/epoxy a cracked tub on a Maytag MAH6500AWW? PART NUMBER AP4028180 Made by: Whirlpool.
1 Answer Hello Tom! No, if the tub is cracked it will need to be replaced. We'll need your serial number to determine the correct replacement tub available for model MAH6500AWW. Thanks. Read More...
Mitch November 26, 2013 I'm about to work on a Maytag Atlantis # MAV6257. There is water coming down in between the Transmission and the outer Basket. In your opinion without tearing it down what parts will I need?
1 Answer Hello Mitch. It sounds like the tub seal W10219156 is bad and will need to be replaced on the unit. Read More...
Bill S October 22, 2013 for Model Number Maytag MAH 6500 AWW Tub bearings need replacement. Can I install the bearings myself, do I need any special tools? What bearings would I need and are there any other items that need replacement with the bearings, such as seals?
1 Answer Hello Bill. You must order the tub assembly 22004465 for the bearings. The problem is they do not sell the new seal and the old one will leak in the unit. They are not available separately. If you just want to do the bearings and chance it, you can order part numbers 22002934 and 22003441 for the bearings. Read More...
Don May 25, 2013 for Model Number MAH3000AWW As in the other questions, the spin cycle is very loud due to the failed tub bearing. Can I order just the bearings for Model MAH3000AWW? And can the bearing be replaced without special alignment jigs?
1 Answer Hello Don. You will order part number WP22002934 and WP22003441 for the bearings. There is no special tools offered for this repair, but the bearings will need to be pressed into the outer tub and the tub may bust doing this. Read More...
Frank May 13, 2013 for Model Number 22004465 Is this the complete tub assembly, as Maytag sells by this number, or is this just a repair kit?
Barry May 08, 2013 for Model Number MLE2000MHW2000 The seal is leaking from the bearings in the back of the outer drum. Can I purchase the seal and the bearings for the outer drum without buying the outer drum ?
1 Answer Barry, The bearings can be replaced. The part numbers that you will need to order would be 12002022 Lip Seal, WP22002934 Front bearing, WP22003441 rear bearing, 12001979 bolt kit, and WP22002123 Molykote lubricant for the shaft. If there is damage to the spinner support you will need part number W10181639. Read More...
Ken April 02, 2013 for Model Number MAH5500AWW Can I buy just the front and rear bearings for this model?
1 Answer Hello Ken! Yes, the front bearing is part number WP22002934 and the rear bearing is part number WP22003441. Thanks! Read More...
Stan E December 01, 2012 for Model Number MLE2000AYW Can I remove the tub from the front? It is a stacked unit .
1 Answer Hello Stan. No, the unit will need to be un-stacked to replace the outer tub assembly 22004465. Read More...
Al October 25, 2012 for Model Number MAH55FLBWW As others have asked, my bearings are bad and the cost for an outer tub assembly is prohibitive. Can I just change out the front and rear bearing and seal kit. What are the part numbers for these and are there any other parts or issues with changing out these bearings?
1 Answer Hello Al, The rear bearing is not available without the outer tub assembly 22004465. As per the manufacturer, if the rear bearing isn't pressed in exactly straight, it will cause the seal to fail and leak prematurely. The manufacturer uses a jig to hold everything exactly in place to press it in properly. Read More...