1 Answer Robert, The spark module 12001596 on your range, should be located on the left side of the rear of the unit. You'll need to slide tthe range out, unplug the power cord and remove the rear lower cover panel. Thanks and Good Luck Read More...
Gerald February 01, 2012 for Model Number KGRT 500BWH2 This is a kitchen Aid gas range. There is no clicking noise when I turn on any of the burners or stove. Gas is coming out. It just stopped igniting. What is the problem. Thanks!
1 Answer Hello Gerald. Check and make sure the igniter switch WP7403P279-60 is closing. If so, then you will need to replace the spark module WP4454392. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Tom May 26, 2011 for Model Number Magic Chef CGR3760ADW I'm having trouble to LF and LR burners which are not sparking when the nob is turned to the "LITE" position. It clicks as the spark appears in the RF and RR burners but not the left ones. There is gas coming out of the burners but no spark so no flame. Looking at the burners closely, the ceramic sleeve on one of the spark nodes is slightly broken and has fallen off. As the burners are sealed, it's hard to look close into them. Any suggestions on how to fix the above issues with instructions would be appreciated! Thanks.
1 Answer Hello Tom. You will need to replace the spark module 12001596 and any broke igniters. You will need to remove the burners to change the igniters. To do this, turn the burners clockwise about 1 and 1/2 inch to loosen it. Some minor crunching or grinding sounds will be heard, this is normal. Once removed, you will be able to replace the igniters 74004053. The spark module is mounted on a bracket on the base frame on the back of the range. Hope this helps. Read More...
Andrew April 12, 2011 for Model Number 7458xva My burner on my Magic Chef Stove does not light. When I turn burner to on position, it makes a clicking noise but does not light. What is likely the problem?
1 Answer Hello Andrew! Look to see if the burner is sparking. If it is not, you will have a problem with either the ignitor which comes with the burner WP3412D024-09 or the spark module 12001596. Hope this helps! Read More...