Steve July 01, 2013 For this part 8193504 is there any way just to order the rivet and connector? The arm is fine, the rivet has failed.
Art C November 03, 2012 for Model Number KUDPO1ILBL5 Trying to install upper wash arm (8193504). Very awkward with long arm butting up against top of Dish Washer..Can upper part of long arm be easiily removed? If not can upper long arm be bent? Hoping for improvement over hit & miss installation made with order # 2553561,of 5/1/2012, which lasted only untill now. Thank You....Art Clayton
1 Answer Art, You'll want to remove the feed tube assembly 8268361 and check the attachment area for distortion and damage. " Removing the Inner Feed Tube and Lower Spray Arm The Inner Feed Tube is held in place by two (2) metal clips. One is located on the inner top of the dishwasher tub. The second is located on the back of the dishwasher tub. Remove the two (2) dishracks from the dishwasher tub. Unsnap the inner feed tube from the two (2) metal clips securing it to the dishwasher tub. Rotate the rear feed cap ¼ turn clockwise. The entire inner water tube assembly and the lower spray arm assembly can now be removed from the dishwasher tub." You can then check and repair or replace the parts asa needed. Read More...
K. Brown October 02, 2012 for Model Number KUDS01FLWH6 I have all of the parts, but they will not stay attached during the wash cycle. I have ordered a new set, but until it comes; is there any thing else I can do to keep the three parts together? Upper Wash Arm and the mounting pins. Item Number: AP3120022
1 Answer Hello K. Brown. No, if the parts are broken, you will need to wait on the new set to come in. Sorry. Read More...
Michelle August 03, 2012 for Model Number KUDS01ILBS3 How do I remove the pins, so I can remove the top spray arm?
1 Answer Hello Michelle, The plastic pin should snap out. If you can't get it out with your hands, try prying it out with a screwdriver or similar tool. In some cases it is easier to remove the pin with a set of diagonal cutters, but you do have to be very careful not to cut the pin. Read More...
Cindy September 14, 2011 for Model Number KUDS01DJSP Which direction does part 8538389 upper spray arm go, with water slots facing up or down?
1 Answer Hello Cindy. For the upper spray arm 8193504, the slots face down. Hope this helps. Read More...
1 Answer Hello! I have located a link on our free repair forum that will help install 8193504. Thanks! http://forum.appliancepartspros.com/dishwasher-repair/145583-upper-wash-arm-installation-instructions-needed.html Read More...