Eugene January 08, 2013 for Model Number MAH5500BWW I have a Maytag Neptune washer that has been gradually taking longer and longer to fill and will often get "NF" indicating No Fill. Model MAH5500BWW. SN A2981502CE. Which is the correct water valve replacement PN? Thanks, EG
Charity L November 04, 2012 for Model Number MAH7500AWW My serial number is A4814078CP. Is this the correct part for my machine? Part Number: AP4026884 MFG Part Number: 22003245 My water pressure from through the hoses in a bucket is great. When the washer runs and hits the rinse cycle the pressure drops and tries to fill until the no fill warning comes up and won't complete the cycle.
1 Answer Hello Charity. No, you need to order part number WP22003834 for the water valve. Read More...
Steve L September 28, 2012 for Model Number MAH5500BWW Hi I need Water inlet valve for my maytag neptune MAH5500BWW Ser# A940719EJ I think it is this one but a note says there are two option that need reference to Ser# THanks, Steve
1 Answer Hello Steve. Based on the model and serial number provided, 12001930 is the correct water valve. Read More...
Don September 05, 2012 for Model Number MAW5500BWW My serial number is 67776500Zf. Do I need AP4026884 or AP4029160?
1 Answer Hello Do. Based on the model and serial number you provided, you need to order WP22003834 for the correct water valve. Read More...
Ken M August 11, 2012 for Model Number Mah5500bww My Neptune washer is shutting off with message NF. Appears on cotton, heavy and stain mode the washer does not get enough water and therefore shuts off. All hoses are free and nothing on screens. In other smaller cycles washer works ok. What could it be and is it easy for me to fix myself? Please let me know and thanks. Ken
1 Answer Hello Ken. Based on the information you provided, it sounds like the water valve WP22003245 may be bad and would need to be replaced. Read More...
Etienne August 01, 2012 for Model Number MAH5500BWW I just replaced the water valve to fix a lack of warm water flow and now the cold water flow is very poor (shut-off is fully open and all screens are clean). Is my new valve faulty or is there something else that controls the amount of cold water entering the dispenser?
1 Answer Hello Etienne. The water valve WP22003245 had a thermistor built into it and this controls the mix of temperature and the solenoids controls the amount of water. Read More...
Etienne June 29, 2012 for Model Number MAH5500BWW Can a faulty valve result in only a small amount of hot water entering the machine? Serial number is 10770355YZ. If so, correct valve number?
1 Answer Hello Etienne. Yes, if the valve is bad, it can cause the issue you are having. Based on the model and serial number, WP22003245 is the correct valve. Read More...
Vicki April 11, 2012 for Model Number MAH5500BWW, Serial 67773197ZF The tub overflowed. The water continues to fill when machine is unplugged. I have to turn off the water at the facet. The spin cycle pumped out the water. Is a new water valve needed, and if so, which one? Will I need any additional parts to install? Thanks for your help.
1 Answer Hello Vicki, When the water flows with the power to the unit disconnected, the water inlet valve WP22003245 has failed. This should take care of the problem with no other parts. Be sure to unplug the unit and turn off the water before disconnecting the water hoses. Read More...
Josh February 17, 2012 for Model Number MAH5500BWW SN:A9378102EN Which valve do I need? AP4026884 or AP4029160?
1 Answer Josh, according to your model/series you will use part number WP22003834 for the water inlet valve. Thanks! Read More...
Mike January 23, 2012 for Model Number MAH5500BWW Serial # A9000985EG Is this the correct part for my washer?
1 Answer Hello Mike! For the listed model/serial combination you will use water valve part number WP22003834. Thanks! Read More...