Pat February 28, 2018 for Model Number MAH7500AWW 1st water filled when off, now no water at all. Which water valve part number for mah7500AWW serial #A9294444EC
1 Answer Hello Pat. You will need to order WP22003834 for the valve needed for the unit. Thank you. Read More...
Wm. Dennis January 28, 2017 for Model Number MAH5500BWW HOW DO YOU OPEN TOP LID TO REPLACE WATER VALVES?
1 Answer Wm Dennis, You will want to open the door and remove the door hinges and the screws on the opposite side of the opening. Once you remove these screws you will want to remove the front panel by pulling from the top. Once removed you will take the screws holding the bracket for the main top. Then lift the main top. Read More...
Robert F. May 11, 2016 for Model Number MAH7500AWW I have a Maytag Neptune Washer whose sound when spinning resembles a Boeing taking off. It also has a small leak underneath but I cannot find its exact location. Its Serial Number is 10812731ZB What is the correct part numbers for : a) lip seal kit, b) drain pump, c) tub to pump hose, d) drain hose replacement kit Thanks,
1 Answer Hello Robert. You will need to order 22004465 and W10181639 in order to repair the unit. Read More...
Chip September 29, 2015 for Model Number MAH5500BWW serial number 73928764ZS The cold water does not flow in machine. Do I need a new water valve. If so, which one do I need.
1 Answer Chip, You would want to check to make sure that there is power getting to the valve and check to make sure that the screen on the valve is not clogged. If this checks ok then the valve would be faulty and need to be replaced with part number WP22003245. Read More...
Dean E. May 19, 2015 for Model Number MAH6500AWW My machine fills up with water when not in use. What valve do I need model MAH6500AWW serial# 17883665AP
Patrick April 25, 2015 for Model Number MAH7500AWW Serial #A9152862EC. Which water valve do I need to order for a tub that fills up with water when it is turned off? Thank You.
1 Answer Patrick, based on the model/serial number provided the replacement valve is part number WP22003834. Thanks! Read More...
Champy January 17, 2015 for Model Number MAH5500BWW My washer was stored over the winter in an unheated garage. Now that I have hooked it up inside the house water is spewing out the back upper vents. After lifting the lid it looks like the center outlet that is capped on the water valve has split (probably frozen?). Serial number is 85990886AE. What is the correct replacement PN for the water valve assembly?
1 Answer Hello Champy, WP22003834 is the correct part number for the two coil water valve (blue) on the model and series you posted. In case your water valve has four coils, this part is WP22003245. If the unit has two coils and they are beige, 12001930 is the part number for this design. You should be able to tell by looking at the pictures of the parts, but by the literature, the first is the one that will fit your model. Read More...
Amy December 27, 2014 for Model Number MAH7500AWW Serial #A4809255CC. Filling with water when not in use and flooded water onto floor. What part is needed to fix this problem?
Eric B November 19, 2014 for Model Number MAH5500BWW Which type of water valve do I need. SN A9722699EA. Thanks.
1 Answer Hello Eric. You need to order part number WP22003834 according to the model and serial numbers. Read More...
Robert F November 02, 2014 for Model Number MAH7500AWW I have a Maytag Neptune washer that is taking too long to fill. When the washer runs and hits the rinse step it sometimes won't complete the cycle. The water also continues to fill when machine is unplugged. Model MAH7500AWW. SN 10812731ZB. Which is the correct water valve replacement PN? Thanks,