Parts for Columbia 31AH9575897 / 2009: .Quick Reference Parts

This plastic slide shoe is a genuine MTD part, sold individually. This plastic slide shoe can be used as a replacement part in a snowblower. The purpose of the plastic slide shoe in a snowblower is to allow a small bit of snow to hold over below the snowblower so that the appliance does not come into direct contact with the concrete surface, which could damage the appliance.The plastic slide shoe in a snowblower might have to be replaced at some point within the typical lifespan of the appliance if the plastic slide shoe can no longer protect the snowblower from damage while in use. If the plastic slide shoe is lost, misplaced, or compromised to the point of reduced or negated functionality, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This plastic slide shoe is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, and Troy-Bilt.

This replacement part is a cable assembly. This is a genuine replacement part made by MTD. This cable assembly is made up of many different wires and is responsible for connecting certain parts together so that they may work in tandem during use. A new cable assembly might be needed if the current one is unable to stay secure within the machine or is damaged in any way. The cables might have become stripped down over time and should be replaced if this happens. This is common after years of normal wear and tear for this to be the case. Be sure the engine is completely turned off and cooled down before attempting to repair this specific part. Refer to the correct user manual before starting this repair. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part.

This is a small engine spark plug positioned in the engine cylinder head. It supplies the spark that will ignite the air-fuel mixture to enable an engine to produce power. This particular spark plug is designed with superior corrosion resistance and dependable performance. Small but mighty, this component allows for increased conductivity and heat control. If the spark plug is damaged or in poor condition, many problems may arise in equipment, including sudden stop while running, overheating, and excessive gas consumption. Replace the spark plug by disconnecting the spark plug wire first, then use a socket driver or wrench to remove the spark plug. Install the new spark plug by turning it by hand initially to avoid cross-threading. If it doesn't twist anymore, use a deep socket wrench or socket driver to tighten the plug until snug. The spark plug can also be used to tune up outdoor power equipment or improve a small engine. This part is recommended to be replaced once per season. This part works with lawn mowers, snowblowers, tillers, leaf blowers, log splitters, wood chippers, and others with small engines. It is compatible with brands such as Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut. This is a genuine OEM part directly from the manufacturer and is sold individually.

This part is a replacement chute tilt cable. This part can be used to replace a defective or broken chute tilt cable in a variety of snow blowers. The chute tilt cable allows the user to adjust the angle of the snowblower's chute. Over time, cables may become worn, frayed, stretched, or snapped, requiring replacement with a genuine OEM replacement part. It's important when working on or near to any mechanical equipment that it is powered off and completely cooled down before starting any repairs.As an authentic MTD OEM replacement part, this chute tilt cable is suitable for use on several different models of snowblowers that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

Note: This is a quantity of 1 shear pin only. For kit of 4 shear pins with retainers, order OEM-738-04155

This auger cable is a genuine MTD part. It is manufactured for use with snowblowers and snow throwers. On a snowblower, the auger cable connects the control lever and the engagement lever as part of the machine's auger drive system. If the auger cable becomes worn or broken, the snowblower will malfunction and may not work at all.Typically, the auger cable will last the life of the mower, but it may become damaged, especially while performing another repair or through extended use. To replace the auger cable, disconnect the spark plug, let the engine cool, and empty the fuel tank. Remove the belt cover, disconnect the cable from the cable guide pulley, release the cable from the bracket, disconnect the cable completely, and then install the new auger cable.This auger cable is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with equipment made by Columbia, Craftsman, White Outdoor, Troy-Bilt, and Yard-Man.

This part is a replacement spiral assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a defective or broken spiral assembly in various models of snow blowers and snow throwers.The spiral assembly is essential for equipment functionality as it helps to move the snow. This part is particularly subject to wear and tear and thus may need to be replaced if bent, dented, worn, or otherwise faulty or broken. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this spiral assembly, the appropriate owner's manual and equipment diagrams should be referred to. This spiral assembly is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with snow blower and snow thrower models that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

This is a genuine replacement belt designed to work with multiple types of snowblowers. It is sometimes called a wheel drive belt or a V-belt. The belt is installed on pulleys that allow the transfer of motive power from the engine to the wheels and the auger, allowing the snowblower to move forward, as well as break up and throw snow. These belts are made from high-quality rubber, but they will suffer from wear and tear over time. Through normal use, exposure to extreme temperatures, and over time, the rubber can crack, and eventually, the belt will break. If the snowblower's wheels will not turn, it is most likely that the belt needs to be replaced. Replacing the belt is simple, but will require accessing the pulleys. Remove the old belt and then install the new one according to the owner's manual. Note that this is an OEM replacement part and is sold individually. It is designed for Craftsman and MTD snowblowers, as well as models from Ryobi, Huskee, Cub Cadet, Yard Machines, Yard-Man, and Troy-Bilt.

A cotter pin, also known as a hitch pin, is used to secure pins and shafts in place. Meant for snowblowers, riding lawnmowers, and lawn tractors, this bow-tie shaped cotter pin has a double-end design making it easy to pull or push through either side of a pre-drilled hole. This pin snaps into a locked position without tension, keeping it secure during operation. Designed for lawn and garden maintenance equipment, this part ensures secure fastening. If the power equipment is used frequently, cotter pins may have to be replaced regularly so it would be practical to keep extra bow tie cotter pins on hand. It is highly recommended that work gloves be worn during the installation of this part. This part is compatible with Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut brands of lawn mower, snowblower, and log splitters. This is a genuine OEM replacement part that is sold individually.