Parts for Frigidaire CRA106CV111: 03 - Recommended Spare Parts

This replacement filter helps capture airborne particles during normal operation, protecting internal components and supporting proper airflow and performance. Replace a damaged or clogged filter to keep your appliance working efficiently and safely.

• Traps dust, grease, and debris from the airstream to protect the blower and internal parts
• Helps maintain proper airflow for effective ventilation and performance
• Replace if the filter is torn, saturated, misshapen, or heavily clogged
• Common symptoms of a worn filter include reduced airflow, lingering odors, and increased fan noise

• Disconnect power to the appliance before servicing
• Allow hot surfaces to cool; wear cut-resistant gloves—edges can be sharp
• Note the orientation of the old filter and seat the new one the same way
• Restore power and verify airflow after installation

This electronic control board manages a range of appliance functions, restoring control and display responses for the console. Replaces a failed or damaged main control to help the unit operate and respond correctly. What it does:

• Receives and processes user inputs from the front console and sends commands to appliance subsystems.
• Controls timing, cycles, temperature or motor commands depending on appliance model.
• Common symptom fixes: unresponsive buttons, blank or erratic display, cycles that won't start or complete.
• Replaces a burned, corroded, or otherwise nonfunctional main control board.

• One electronic control board (single main console board, part 5304476846).

• Disconnect power (unplug or shut off breaker) before attempting replacement to avoid shock.
• Take anti-static precautions and handle the board by the edges to avoid damage.
• Verify board PN matches your original; use only the exact replacement specified for your model.

This replacement power cord restores AC power to compatible refrigerators by replacing a damaged or worn supply lead. It provides a direct, safe power connection so the appliance can run reliably. What it does:

• Replaces a frayed, cut, or otherwise damaged power supply cord
• Restores consistent power when the appliance will not turn on or has intermittent power
• Maintains the appliance's grounding connection for safe operation
• Prevents electrical arcing from exposed wiring or compromised insulation

• One replacement power cord

• Disconnect the appliance from the power source before inspecting or replacing the cord
• Install with the proper strain relief and secure fasteners to prevent pinching or pull-out

Replacement evaporator fan blade that moves cold air across the evaporator coil and through the refrigerator compartments to help maintain even temperatures. Restores airflow to reduce warm spots and improve overall cooling consistency. What it does:

• Spins on the evaporator fan motor to circulate cold air through the freezer and fresh-food sections.
• Restores proper airflow when the original blade is cracked, warped, or broken.
• Common symptoms prompting replacement: reduced or uneven cooling, rattling/scraping noises from the freezer, or visible blade damage.
• Helps prevent excessive frost buildup by maintaining steady airflow over the evaporator.

• Disconnect power to the appliance before beginning any service.
• Handle the blade carefully; edges and broken pieces can be sharp.
• Ensure the blade is fully seated on the motor shaft and any retaining hardware is reinstalled per the OEM's guidance.

This retainer secures a mating component in your appliance so it stays properly aligned during use. Replacing a damaged or missing retainer restores a snug fit, reduces vibration noise, and helps prevent the attached part from shifting or falling.

• Secures the attached part to prevent movement and vibration
• Maintains proper alignment and fit within the assembly
• Failure clues: attached component is loose, rattles, sags, or won't stay in place
• Visual signs: retainer is cracked, deformed, worn, or missing

• Disconnect power to the appliance before starting; allow hot or moving parts to cool/stop
• Note the original orientation and position; take a quick photo for reference
• Seat the new retainer fully and transfer any original fasteners as needed
• Do not overtighten hardware; verify the held component is secure before reassembly

This cabinet is the outer housing panel that supports and protects the appliance's internal components while restoring the unit's appearance and structure. Use it to replace a damaged, dented, or corroded outer shell. What it does

• Replaces the appliance's outer housing to restore structural support and protect internal parts.
• Covers internal wiring, controls, and insulation to prevent exposure and debris entry.
• Stops drafts, gaps, or misalignment caused by bent or damaged exterior panels.
• Improves appearance by replacing dented, scratched, or corroded surfaces.

• One cabinet (outer housing) as shown.

• Disconnect power (and fuel supply if applicable) before beginning any repair.
• Removal typically requires removing trim, panels, and fasteners—keep hardware organized for reassembly.
• Be careful of sharp edges on metal panels; wear gloves and eye protection.

This window filler kit installs on the sides of a window air conditioner to close gaps between the chassis and the window frame. It helps secure the unit and limit air leaks, moisture, and pests from entering the room.

• Closes the left and right side openings between the unit and sash window
• Helps stabilize the air conditioner and reduce vibration noise
• Replaces cracked, brittle, warped, or missing side curtains/fillers
• Common signs: drafts or visible gaps around the unit; torn or broken accordion panels

• Disconnect power and support the air conditioner to prevent a fall
• Slide the fillers into the unit's side channels or mounting frames per your model's instructions
• Reuse the unit's hardware as directed; avoid overtightening fasteners in plastic components
• After installation, ensure the unit is secured and pitched for proper drainage per manufacturer guidance

Mounting hardware, screws