Parts for Frigidaire FRP77PTT2A0: 03 - Recommended Spare Parts

This temperature sensor (thermistor) monitors internal refrigerator temperature and sends readings to the control board so the appliance can regulate cooling. Replacing a faulty sensor restores accurate temperature sensing for consistent performance. What it does

• Senses internal air temperature and reports it to the control board so the compressor and fans run when needed
• Helps the fridge maintain set temperatures and supports automatic defrost control
• Common symptom: refrigerator/freezer running too long, not cooling properly, or temperature fluctuations
• Faulty sensors can trigger temperature-related error codes or make the appliance run unusually often

• One temperature sensor (thermistor) as shown

• Always disconnect power to the appliance before starting work
• Handle the sensor probe and wiring harness gently; avoid kinking or severe bending of the probe or leads
• Confirm connector and mounting location match the original part before final installation

The Fan Blade is an OEM replacement part for Frigidaire window air conditioners. Located inside the unit behind the protective grill, the fan blade rotates to circulate cooled air throughout the room. Made with corrosion-resistant materials, the precisely balanced blade withstands constant rotation during seasonal operation.  

Symptoms of a bad fan blade include:

• Excessive vibrations or strange noises from the AC unit  
• Reduced air circulation felt in the room
• The blade visibly rubbing or hitting the fan enclosure

Causes can be dirt buildup causing imbalance, broken blade tips from impacts, or loosened set screws allowing shaft wobbling over extended use. 

Replacing this OEM Frigidaire part restores smooth, powerful air distribution. Compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement filter screens out airborne debris to help your appliance maintain proper airflow and protect internal components. Replacing a clogged or damaged filter can restore cleaner ventilation and reduce odors and buildup. What it does

• Traps grease, dust, and particulates before they reach the blower or internal parts
• Helps maintain consistent airflow through the appliance's ventilation path
• Replace when torn, warped, missing tabs, or heavily soiled/saturated
• Common symptoms include weak ventilation, lingering odors/smoke/steam, or visible buildup around vents

• 1 filter

• Disconnect power before servicing; allow any hot surfaces to cool
• Open the access cover or grille and release the old filter from its tabs or screws
• Note the orientation, then install the new filter the same way without bending the frame
• Ensure the filter is fully seated and secured before restoring power

The Grill Assembly is an OEM part for select Frigidaire window air conditioners. It forms the front protective cover and houses key components around the condenser unit. 

Symptoms of a bad grille assembly include:

• Blocked or restricted airflow through the front vent 
• Loose or detached front panel sections
• Rattling noises emanating from the grille area
• Damage, dents, or missing pieces 

Causes can be deformities from impact, cracks from weathering or aging plastic, or loose fasteners that no longer hold the grille securely in place.

Proper airflow is crucial to a window AC unit’s performance and efficiency. A faulty grille inhibits cooler distribution while exposing internal parts to potential foreign object intrusion. 

This OEM replacement is also compatible with Electrolux, Amana, White-Westinghouse, and Kenmore models. Replace today to restore your air conditioner’s protective barrier and optimized ventilation.
 

This control panel is the front console piece that holds the selector buttons and display, restoring the appliance's user interface and appearance. It replaces a cracked, faded, or damaged console surface so controls are accessible and protected. What it does:

• Provides the finished front surface for the appliance controls and display
• Secures and aligns buttons, touchpads, and the display assembly
• Restores proper button access and visible labeling for normal operation
• Helps prevent moisture and debris from reaching internal electronics

• Intended as a direct replacement; fit using your model and part number before installation
• Remove power to the appliance before beginning work to avoid electrical shock
• Handle the panel carefully to avoid scratching the finish or damaging attached components
• If the panel attaches to electronics or a display, connectors are seated and wires routed per factory orientation

This refrigerator water filter cartridge replaces a clogged or expired filter to help improve the taste and clarity of drinking water and ice. It provides basic carbon filtration to address common taste and odor issues. What it does:

• Filters water for the dispenser and ice maker to help reduce common taste and odor problems.
• Helps trap sediment and particulates that can cloud ice or affect flavor.
• Restores proper water flow and dispenser performance when an old filter is restricted.
• Supports fresh-tasting drinking water between scheduled filter changes.

• Turn off the water supply to the refrigerator per the manufacturer's instructions before replacing the filter.
• Remove the old cartridge following OEM guidance; install the new filter until it seats or clicks into place.
• Flush the new filter by dispensing water until it runs clear.
• Inspect for leaks after installation and replace on the schedule recommended by the refrigerator manufacturer.

The Cover for the Remote Control is an OEM replacement part for Frigidaire air conditioners. This cover serves as a protective shield for the remote control sensor, ensuring that the sensor remains intact and free from dust, debris, or physical damage. It helps maintain the proper function of the remote control by ensuring that signals are transmitted effectively between the remote and the air conditioner unit.

A damaged or malfunctioning cover can result from wear and tear over time, physical impact, or exposure to environmental elements. These issues can interfere with the sensor's ability to receive commands from the remote, causing operational difficulties.

Symptoms of a bad cover include:

• The remote control not working properly
• Poor response from the air conditioner to remote commands
• Visible damage or cracks on the cover

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This electronic control board replaces the refrigerator's main control module to restore user interface and operational commands. It manages temperature settings and cycles so the appliance responds correctly to control inputs. What it does:

• Receives and processes user commands from the control panel so settings register and change
• Sends signals to start/stop compressors, fans and defrost cycles to help maintain set temperatures
• Can correct symptoms like unresponsive controls, missing display functions, or intermittent cooling cycles
• Re-establishes proper communication between sensors and components when the original board has failed

• Disconnect power to the appliance before servicing to avoid shock or damage
• Handle the board by its edges and avoid static discharge; use an anti-static wrist strap if available
• Reconnect all wire harnesses firmly and test basic functions before reassembling panels

This replacement capacitor helps the appliance's motor start and run more reliably, restoring normal operation and helping maintain consistent performance. Fits original specifications to support proper motor function and cycling. What it does:

• Provides the electrical boost motors need to start and keep running
• Helps prevent humming, frequent cycling, or failure to start
• Supports compressor and fan motors that rely on a start/run capacitor
• Restores stable motor operation when the original capacitor has failed

• Disconnect power to the appliance before accessing electrical components
• Discharge capacitor terminals with a resistor or follow manufacturer safety procedures before handling
• Inspect mounting and connector types for a correct fit; replace with the same ratings