Parts for Electrolux FFPD12C2R11: 02 - Recommended Spare Parts

A capacitor assembly that provides the start and run assist the refrigerator compressor needs to start reliably and keep the system running. Replaces a failed or weak capacitor to restore normal starting behavior and reduce compressor stress. What it does

• Supplies the electrical boost the compressor motor needs to start and run.
• Commonly used when the compressor struggles to start, hums, or cycles frequently.
• Helps prevent excessive current draw and repeated start attempts that can damage the compressor.
• Works with the refrigerator's start relay and overload/protector as part of the starting circuit.

• One capacitor assembly as shown.

• Disconnect power to the appliance before inspecting or replacing electrical components.
• Capacitors can hold a charge—discharge safely and only handle after power is removed.
• Replace with the exact part; match mounting, terminals, and ratings as shown in the service diagram.

This replacement cover is the protective housing that shields internal components and helps keep wiring and controls safe from debris and accidental contact. Restores proper enclosure and helps maintain appliance safety and appearance. What it does:

• Protects internal wiring, terminals, and components from dust, spills, and accidental contact
• Helps keep controls and electronics correctly enclosed to prevent shorting or damage
• Covers damaged or missing panels that can allow debris into sensitive areas
• Can reduce rattles or vibration-related noise caused by loose or missing covers

• One replacement cover

• Disconnect power (unplug appliance or shut off breaker) before attempting installation
• Remove any mounting screws or clips holding the old cover; retain fasteners if they are reusable
• Handle edges carefully to avoid scratching finish or contacting exposed wiring

This access panel cover protects internal components and finishes the appliance exterior. It restores a clean look and helps keep wiring and controls shielded from dust and accidental contact. What it does:

• Covers and protects internal controls, switches or wiring behind the panel
• Prevents debris and dust from reaching sensitive components
• Restores a finished appearance to the appliance cabinet
• Can stop rattling or vibration caused by a missing or damaged cover

• One access panel cover

• Turn off power to the appliance before attempting any repair
• Remove fasteners or clips holding the old cover and reinstall the replacement in the same orientation
• Use appropriate tools and avoid over-tightening screws to prevent cracking the cover

Adapter A is a small plumbing-style connector used to join or route appliance tubing and secure connections where factory fittings are required. It restores a proper sealed connection to prevent drips and ensure reliable fluid routing. What it does:

• Connects or adapts tubing/fittings to restore a factory-style connection
• Helps maintain a watertight seal at the joint to reduce leaks
• Replaces worn, cracked, or damaged adapters that can cause drips or poor flow
• Works where the original OEM adapter was specified for proper fit and alignment

• One Adapter A

• Shut off power and water supply before beginning any repair
• Replace only with the exact adapter style to ensure proper fit; do not force or modify
• Hand-tighten fittings and check for leaks before restoring full water pressure

This replacement drain hose routes wastewater away from the appliance so it drains reliably and prevents pooling. It restores proper water flow and helps stop leaks when the original hose is cracked, clogged, or damaged. What it does:

• Carries used water from the appliance to the household drain or disposal
• Helps prevent water backing up, slow draining, or pooling inside the appliance
• Replaces cracked, split, or clogged hoses that can cause leaks
• Works with standard hose clamps and fittings used on compatible models

• Disconnect power and turn off the water supply before beginning any work
• Use proper clamps and fittings; ensure connections are tight but not over-torqued
• Inspect adjoining fittings and replace any damaged clamps or grommets

This adapter is a small interface piece used within specific assemblies to position and secure a mating part. Replacing a cracked or missing adapter restores a snug, aligned fit and reliable operation.

• Provides the mounting interface between components so hardware seats correctly
• Maintains proper spacing and alignment to prevent wobble or rattle
• Replace if cracked, stripped, distorted, or missing
• Symptoms can include a loose or misaligned component, difficulty tightening hardware, or parts that won't stay secured

• Disconnect power to the appliance; shut off water/gas if applicable
• Protect nearby finishes; keep track of screws/fasteners during removal
• Note the adapter's orientation and location before swapping
• Reinstall hardware carefully and do not overtighten to avoid damage

This window slider is the replacement plastic track piece that guides and supports a refrigerator door/window panel for smooth movement and secure positioning. Restores proper alignment and reduces rattling or loose glass. What it does:

• Guides the door/window panel along its track for smooth opening and closing
• Holds the glass/panel in place to prevent shifting or vibration during use
• Helps stop rattling, scraping, or binding caused by a worn or broken slider
• Replaces cracked, chipped, or missing slider pieces that let the window sit unevenly

• Disconnect power to the appliance before starting any repair
• Handle adjacent glass and panels carefully to avoid breakage or injury
• Basic hand tools may be required; verify orientation before removing old part
• If both sides show wear, replace matching sliders for even operation

This installation kit supplies the mounting hardware needed to install and secure compatible ranges or wall ovens, helping achieve a proper fit and stable placement in the cabinet opening. Ideal for replacing missing or damaged install components. What it does:

• Provides mounting brackets, screws and trim hardware used to secure and align a range or wall oven
• Helps eliminate loose or wobbly appliances by fastening the unit to the floor, cabinet or wall framing
• Restores proper fit and gap alignment when original installation parts are missing or damaged
• Useful when replacing an appliance or completing a new installation

• Follow the appliance installation instructions and local codes; this kit is for installation hardware only
• Disconnect power (and shut off gas for gas appliances) before starting work
• Some installations may require drilling or cabinet modification; have basic tools on hand

This door gasket seal kit restores a tight refrigerator/freezer door seal to help maintain cold temperatures and reduce moisture, frost, and energy loss. Use it when an old or damaged seal no longer closes properly. What it does:

• Replaces worn or cracked door sealing material to improve cold-air retention
• Helps prevent frost buildup and interior condensation caused by leaks
• Reduces strain on the compressor by improving thermal efficiency
• Restores a uniform door closure to eliminate drafts and uneven cooling

• Disconnect power or unplug the appliance before starting any work
• Clean and dry the door channel thoroughly before installing the new gasket
• Press the gasket evenly into the channel; small hand tools may help seat the seal
• Inspect hinge alignment and mounting surfaces; adjust if the door does not close flush