Parts for Lg LFX32945ST: Refrigerator Compartment Parts

The Water Filter is an OEM replacement part for LG refrigerators. It is designed to remove impurities, contaminants, and unwanted particles from the water supply, ensuring that the water dispensed and used for ice making is clean and fresh.

Symptoms of a need to replace the water filter:

• Unpleasant taste or odor in the water or ice
• Decreased water flow from the dispenser
• Discoloration or sediment visible in the dispensed water

Causes of a faulty water filter can include general usage over time, exposure to high levels of contaminants in the water supply, or physical damage or clogging of the filter media.

This OEM LG part is also compatible with some Kenmore refrigerator models.

This door stopper is the replacement part that cushions and limits a refrigerator door's travel to prevent slamming and reduce wear on hinges and seals. It helps restore smooth, controlled door movement and alignment. What it does:

• Absorbs impact as the door closes to prevent hard slams and noise
• Limits how far the door opens to protect adjacent cabinetry and seals
• Helps maintain proper door alignment for an even seal and consistent cooling
• Common symptom: door slams, hangs up, or doesn't stop at the correct open position

• One door stopper

• Disconnect power or unplug the appliance before inspecting or working near door components
• Installation typically requires removing the door trim or hinge cover—refer to your model's service instructions
• Handle small parts carefully and retain screws or clips removed during replacement
• If the door is heavy or awkward, get a helper to support it during work to avoid damage or injury

This replacement glass shelf restores a sturdy, level storage surface in the refrigerator's fresh food section and helps contain small spills. Replace if the original glass is cracked, chipped, sagging, or missing to keep items stable and organized.

• Provides a flat, load-bearing surface within the shelf frame
• Helps contain minor spills for easier cleanup
• Maintains spacing and organization between shelf levels
• Typical symptoms: cracked/chipped or shattered glass, shelf won't sit flat, missing glass panel

• Remove food items and carefully slide out the shelf/frame assembly
• Wear cut-resistant gloves; remove any broken glass fragments safely
• Place the new glass fully into the frame, ensuring it's seated on all sides
• Reinstall the shelf and confirm it sits level before loading items

The Tray Assembly is an OEM part for LG refrigerators. This interior tray provides a dedicated storage shelf to organize items in the fresh food compartment. The tray is designed with edges to securely hold containers and packaging in place.

Causes of a bad tray can be cracks or fractures developing from long term use and weight exposure, or accidental damage from mishandling.

Symptoms of a bad tray include:

• Warping, bending, or breakage of the plastic tray over time
• Items placed on the tray sliding around excessively
• The tray no longer fitting properly inside the refrigerator shelving

This OEM LG part is also compatible with some Kenmore models.

This vegetable tray assembly replaces a damaged or worn crisper drawer to restore storage for fresh produce and help maintain proper organization in the refrigerator. Designed as a direct-fit replacement identified by the OEM part number. What it does:

• Holds fruits and vegetables to keep them separated from main shelves
• Slides on rails for easy access to stored produce
• Replaces cracked, chipped, or warped crisper trays that no longer seal or slide smoothly
• Restores proper fit and alignment within the refrigerator's drawer cavity

• Remove all food from the drawer area before beginning installation
• Lift out the old tray by disengaging the drawer from its rails; reverse to install the new tray
• Handle with care to avoid damage; inspect rails and catches for wear before reinstalling

A replacement vegetable tray assembly that restores the crisper drawer storage area so produce stays organized and contained. Fits into the lower refrigerator storage compartment to replace cracked, warped or missing trays. What it does:

• Provides a dedicated bin for storing fruits and vegetables to keep the compartment tidy
• Replaces cracked, broken, or warped trays that can leak or fail to hold items
• Slides into existing drawer rails for normal open/close operation
• Helps prevent produce from spilling onto lower shelves and improves usable storage space

• Remove all food from the drawer area before installing
• Slide out the old tray and align the new tray with existing rails; seat fully until it moves smoothly
• Handle edges carefully to avoid cuts from broken plastic; wear gloves if needed
• No electrical disconnection required, but unplug the appliance before performing other service

Restore the produce storage in your refrigerator with this vegetable tray assembly. It replaces a damaged or missing crisper so fruits and vegetables stay organized and the drawer slides correctly in its tracks for everyday use.

• Provides dedicated storage for fruits and vegetables in the fresh food compartment
• Slides in and out smoothly when properly seated on the crisper rails
• Replaces drawers that are cracked, warped, stained, or missing
• Can help resolve issues like jamming, falling off track, or not closing flush

• Remove all items from the old drawer before servicing
• Pull the drawer straight out to the stop, lift the front, and remove
• Inspect and clear any debris from the slides/rails before installing
• Align the rear of the new drawer on the rails and push straight in—do not force

This cover assembly replaces a damaged or missing rear housing panel to protect internal TV components and restore the set's fit and finish. Designed to match the original enclosure for a clean, secure repair. What it does

• Shields circuit boards, power components, and connections from dust and impact
• Restores proper alignment of the TV cabinet and mounting points
• Prevents loose parts or rattling caused by cracked or warped housing
• Helps maintain cooling airflow paths designed into the original enclosure

• One cover assembly (rear TV housing) as pictured

• Unplug the TV and place it on a soft, flat surface before starting
• Remove the stand and any attached bezels per the service manual to access mounting screws
• Reuse original screws and grounding/seat clips unless damaged; avoid overtightening

This rail guide assembly keeps a refrigerator drawer or shelf sliding smoothly and aligned, restoring proper movement and reducing scraping or binding. It replaces a worn or damaged guide to help drawers open and close reliably. What it does

• Supports and guides the drawer or shelf along its track for smooth movement
• Prevents misalignment that causes sticking, scraping, or uneven travel
• Reduces noise from a worn or broken guide
• Restores proper fitment so drawers sit flush and operate correctly

• One rail guide assembly

• Disconnect power and empty the drawer before starting; refer to your manual for model-specific access
• Typically installs with basic hand tools; retain any removed fasteners for reassembly
• Inspect mating slides and mounting points; replace or repair damaged hardware to ensure proper operation
• Follow all safety guidance from the appliance manufacturer

This guide assembly supports and guides a slide-out drawer or shelf so it moves smoothly and stays aligned. It replaces worn, bent or broken guides to restore proper drawer travel and reduce noise or sticking. What it does:

• Provides a stable rail surface for the drawer or shelf to slide on
• Keeps the drawer aligned to prevent binding or uneven movement
• Replaces damaged or worn guides that cause sticking, grinding or wobbling
• Helps reduce noise from loose or misaligned drawer travel

• One guide assembly

• Disconnect power to the appliance before starting any repair when applicable
• Remove the drawer or shelf to access the guide; keep fasteners for reinstallation
• Inspect mounting points and replace any stripped hardware before installing the new guide
• Test drawer movement after installation to ensure proper alignment and secure fit