Parts for Lg LSC22991ST: Refrigerator Door Parts

The Water Filter LT800P is an OEM part for LG refrigerators. This filter is designed to remove contaminants from the water supply, ensuring clean and fresh-tasting water and ice.

Causes of a bad water filter can include extended use beyond its recommended lifespan, exposure to high levels of contaminants, or damage to the filter itself.

Symptoms of a bad Water Filter LT800P include:

• Unpleasant taste or odor in the water or ice
• Reduced water flow from the dispenser
• Indicator light signaling the need for replacement
• Visible sediment or particles in the water

This OEM LG part is also compatible with Sears/Kenmore.

This upper hinge assembly secures and guides the refrigerator door at the top hinge point to keep the door aligned and closing smoothly. It replaces a worn or damaged hinge to restore proper door movement and fit. What it does:

• Supports the top of the refrigerator door and provides a pivot point for opening and closing
• Helps keep the door aligned to maintain an even seal and prevent gaps
• Resolves symptoms like door sagging, uneven gaps, rubbing, or noisy operation at the top hinge
• Works with the existing hinge pin and mounting location to restore smooth articulation

• Disconnect power to the appliance and remove food from the door before starting
• Support the door while removing and installing the hinge to prevent dropping or damage
• Use original mounting screws/fasteners and tighten to secure alignment; check door operation and seals after installation

A replacement holder assembly bracket that secures related components in the appliance so shelves, panels or small assemblies stay aligned and stable. Restores proper support and reduces movement or rattling from a damaged or worn bracket. What it does:

• Provides a secure mounting point for compatible internal components and trim
• Keeps shelves, panels or small assemblies correctly aligned and supported
• Stops looseness, clunking or vibration caused by a broken or missing bracket
• Helps prevent further wear to attached parts by restoring proper support

• One holder assembly bracket

• Disconnect power before starting any repair to avoid shock or injury
• Requires basic hand tools; remove surrounding panels or shelves for access
• Handle carefully to avoid damaging adjacent trim or door panels
• Reuse only if in good condition; replace damaged fasteners

This Door Basket Assembly is the replacement door bin that holds bottles, condiments and other items on the appliance door, restoring secure storage and organization. It replaces cracked or damaged door bins to keep items from shifting or falling. What it does:

• Provides a molded shelf on the door to hold bottles, jars and small containers
• Replaces cracked, broken or warped door storage that no longer secures items
• Stops items from shifting or falling when opening or closing the door
• Restores original-fit storage layout and usable door space

• One Door Basket Assembly

• Disconnect power (or unplug fridge) before starting any repair
• Remove existing basket by lifting or releasing retention clips; install new basket by aligning and snapping into place
• Use common hand tools if needed; avoid excessive force to prevent damage to the door liner
• If the door liner or mounting clips are damaged, inspect and replace those parts as required

This Door Basket Assembly is the replacement door bin that holds bottles, condiments and other items on the appliance door, restoring secure storage and organization. It replaces cracked or damaged door bins to keep items from shifting or falling. What it does:

• Provides a molded shelf on the door to hold bottles, jars and small containers
• Replaces cracked, broken or warped door storage that no longer secures items
• Stops items from shifting or falling when opening or closing the door
• Restores original-fit storage layout and usable door space

• One Door Basket Assembly

• Disconnect power (or unplug fridge) before starting any repair
• Remove existing basket by lifting or releasing retention clips; install new basket by aligning and snapping into place
• Use common hand tools if needed; avoid excessive force to prevent damage to the door liner
• If the door liner or mounting clips are damaged, inspect and replace those parts as required

This door basket is the replacement storage bin that mounts inside the appliance door to hold bottles, jars and small items for easy access. It restores lost or cracked door storage and helps keep contents secure. What it does:

• Replaces a cracked, broken or missing door storage bin so items stay organized in the door
• Secures bottles, jars and small containers during normal use
• Restores the original storage capacity and accessibility of the door
• Helps prevent items from falling out when opening or closing the door

• Remove door shelves or inner door panel to gain access
• Handle edges and clips carefully to avoid breaking the plastic mounting points
• Disconnect power and follow OEM safety instructions when removing the door or door trim

Restore secure door storage with this refrigerator door basket. It replaces a cracked, loose, or missing bin so items stay organized and in place when you open and close the door—bringing back the usable space you rely on.

• Attaches to the inner door liner rails to provide shelf-style storage
• Helps keep bottles, jars, and condiments organized and accessible
• Replace if the bin is cracked, tabs are broken, it won't stay seated, or it's missing
• Restores original door storage capacity

• Disconnect power and remove items from the door before replacing
• Lift the old bin up and out of the door liner channels
• Align the new bin with the channels and press down until it snaps securely
• Verify the bin is fully seated before loading items

This slide rail guides a refrigerator or freezer drawer so it opens and closes smoothly and stays aligned. Replaces a worn or bent rail to restore stable drawer movement and prevent sticking or sagging. What it does

• Supports and guides the drawer along the cabinet track for smooth opening and closing
• Restores proper drawer alignment and prevents binding or catching
• Replaces damaged, bent, or worn slider surfaces that cause noise or uneven movement
• Works as part of the drawer slide assembly to maintain load support

• One slide rail (single rail as shown)

• Inspect both left and right rails and replace matched pairs when both are worn for best performance
• Power off and empty the drawer before removing/installing rails to avoid injury or damage
• Retain all original fasteners; use only manufacturer-recommended screws if replacements are needed

A replacement bucket frame that supports and secures the removable bucket assembly, restoring correct alignment and stable operation. Fits into the bucket housing to keep the bin seated and prevent wobble or rattle. What it does:

• Provides structural support for the removable bucket assembly so the bin stays properly positioned.
• Prevents bucket misalignment that can cause noise, scraping, or difficulty removing the bucket.
• Restores a secure fit to reduce movement that can lead to spills or uneven wear.
• Works with the existing bucket and housing; matches OEM fit and function.

• One bucket frame support bracket

• Disconnect power or unplug the appliance before servicing.
• Removal/installation typically requires basic hand tools (screwdriver or nut driver); handle plastic tabs carefully to avoid breakage.
• Align tabs and mounting points before securing to avoid cracking the frame.

This replacement home bar case is the removable door shelf that holds small bottles and items in the refrigerator's home bar compartment. It restores secure storage and keeps the door organized for easy access. What it does:

• Replaces a cracked, broken or misshapen home bar shelf that won't hold items securely
• Restores proper fit and alignment in the door's home bar compartment
• Helps eliminate rattling or items falling when the door opens and closes
• Provides the same mounting points and shape as the original for a direct fit

• Remove all contents from the home bar area before replacing the case
• Typically installs by snapping into the existing door mounts; inspect clips for damage
• If mounting clips are damaged, replace clips before installing the new case
• Unplug the appliance or switch off power if required for safe access to the door area