Parts for Kitchenaid KRFC804GPS00: Refrigerator Liner Parts

The Refrigerator Water Filter is an OEM part for Whirlpool refrigerators. It delivers clean, filtered drinking water and ice by effectively reducing contaminants, including chlorine taste and odor, particulates, and various other harmful substances that may be present in the water supply.

Causes of a bad Refrigerator Water Filter can include regular wear and tear over time leading to reduced efficacy in filtering out contaminants, as well as accumulation of contaminants and sediment.

Symptoms of a bad Refrigerator Water Filter include:

• Noticeable decrease in water flow rate.
• Unpleasant taste or odor in the water or ice.
• Discoloration of water or ice.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Whirlpool EveryDrop Ice and Water Refrigerator Filter 2 is an OEM replacement part for Whirlpool refrigerators. This advanced water filter is designed to provide superior filtration for both the ice maker and water dispenser. This water filter effectively reduces numerous contaminants, including lead, pesticides, and pharmaceuticals, ensuring that your drinking water and ice are not only clean but also taste great.  

Regular replacement of the EveryDrop Filter is recommended to maintain optimal performance and water quality. Over time, filters can become clogged with particles and contaminants, leading to reduced water flow and a decline in the effectiveness of filtration.

Symptoms of a filter that needs to be replaced include:

• Noticeable decrease in water flow rate from the dispenser
• Unpleasant taste or odor in the water and ice
• The filter indicator light on the refrigerator turns on

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The FreshFlow Refrigerator Air Filter is an OEM component for Whirlpool and Maytag refrigerators. Located inside the ventilation system, this filter purifies circulated air. This air filter is 3" wide by 2" high and white in color. It should be replaced every 6 months to ensure the best performance.

Causes of failure relate to clogging from trapped dust, dander and other allergens despite regular replacement intervals. Performance decreases as filter media becomes saturated over months of use.  

Symptoms of a dirty or blocked refrigerator air filter include:

• Reduced airflow causes higher compressor runtime hours  
• Odors being pulled into the fridge from unfiltered vents  
• Shortening of food storage life due to unpurified air exposure
• Reduced fan speeds or strange noises originating from the vents

This genuine Whirlpool filter is also compatible with Maytag, Jenn-Air, and Amana models as well.

The Valve is an OEM component specifically designed for Whirlpool refrigerators. This valve controls the flow of water to the ice maker and water dispenser.

Symptoms of a bad valve include:

• Ice maker or water dispenser not functioning properly
• Discolored, bad tasting water 
• Drips or leaks at the dispenser area
• Inability to select crushed ice 

Causes can be mineral deposits or sediment buildup causing clogs over time, or wear and tear on the valve seals. 

It is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Whirlpool EveryDrop Ice and Water Refrigerator Filter 2 is an OEM replacement part for Whirlpool refrigerators. This advanced water filter is designed to provide superior filtration for both the ice maker and water dispenser. This water filter effectively reduces numerous contaminants, including lead, pesticides, and pharmaceuticals, ensuring that your drinking water and ice are not only clean but also taste great.  

Regular replacement of the EveryDrop Filter is recommended to maintain optimal performance and water quality. Over time, filters can become clogged with particles and contaminants, leading to reduced water flow and a decline in the effectiveness of filtration.

Symptoms of a filter that needs to be replaced include:

• Noticeable decrease in water flow rate from the dispenser
• Unpleasant taste or odor in the water and ice
• The filter indicator light on the refrigerator turns on

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The FreshFlow Refrigerator Air Filter is an OEM component for Whirlpool and Maytag refrigerators. Located inside the ventilation system, this filter purifies circulated air. This air filter is 3" wide by 2" high and white in color. It should be replaced every 6 months to ensure the best performance.

Causes of failure relate to clogging from trapped dust, dander and other allergens despite regular replacement intervals. Performance decreases as filter media becomes saturated over months of use.  

Symptoms of a dirty or blocked refrigerator air filter include:

• Reduced airflow causes higher compressor runtime hours  
• Odors being pulled into the fridge from unfiltered vents  
• Shortening of food storage life due to unpurified air exposure
• Reduced fan speeds or strange noises originating from the vents

This genuine Whirlpool filter is also compatible with Maytag, Jenn-Air, and Amana models as well.

The Bracket is an OEM part for Whirlpool refrigerators. It securely holds the water filter in place, ensuring a tight seal and proper filtration of your refrigerator's water supply.

A bad water filter bracket can occur due to wear and tear, damage, or improper installation. If you notice symptoms such as a loose or misaligned water filter, water leakage around the filter area, or a decrease in water quality, it may be time to replace the water filter bracket.

Symptoms of a bad water filter bracket include:

• Loose or misaligned water filter
• Water leakage around the filter area
• Decrease in water quality or taste

Repair your refrigerator's water filtration system by replacing the faulty or damaged water filter bracket with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This replacement screw fastens trim, panels and small components to restore secure attachment and reduce rattling or movement. Use when a screw is missing, stripped, or damaged to keep parts aligned and operating quietly. What it does:

• Secures panels, brackets and trim to appliance assemblies
• Prevents vibration, rattling and misalignment caused by missing or damaged fasteners
• Replaces lost or stripped screws that can allow gaps or loose parts
• Helps maintain safe, stable operation by keeping components properly fastened

• Disconnect power (and water if applicable) before accessing interior panels
• Use the proper screwdriver or driver bit to avoid stripping the head
• Align parts before tightening and tighten until snug—do not overtighten
• Replace only with the correct OEM part to ensure proper fit and function

This electronic control board manages the appliance's functions and user interface, replacing a failed printed circuit board to restore normal cycle control and electronic operation. Fits as the direct replacement for the factory control module. What it does:

• Receives user inputs and sends commands to motors, valves, heaters, and sensors
• Manages timing and cycle selection so the appliance runs intended programs
• Can resolve symptoms like no display, unresponsive controls, cycles not starting, or erratic operation
• Interfaces with touchpads and led/lcd displays to show status and error codes

• Disconnect power before servicing to avoid shock or damage
• Handle the board by the edges and avoid static discharge; use ESD protection if available
• Transfer any user interfaces or harnesses exactly as removed; verify connector seating

The Filter Cap is an OEM part for Whirlpool refrigerators. It seals the water filter housing chamber located inside the refrigerator. The cap plays an important role in properly securing the water filter cartridge and ensuring a tight seal that prevents leaks.

Causes of a bad filter cap can include cracks, deformities, or warping of the cap due to pressure fluctuations over time within the filter housing chamber. 

Symptoms of a bad filter cap include:

• Water leaks from around the filter area  
• Inability to securely lock the filter cartridge in place
• Premature wasting of water when the filter is not fully engaged

This Whirlpool replacement part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This electronic control board replaces a damaged or unresponsive console module to restore electronic control of cycles and user inputs. It provides the interface that receives button/knob commands and runs the appliance's programmed functions. What it does:

• Manages user inputs and displays, translating button/knob selections into control signals
• Controls cycle timing, heaters/motors, and other electronic functions per the appliance's program
• Replaces boards that cause unresponsive controls, error codes, or intermittent operation
• Helps restore normal electronic operation when the original module is visibly damaged or fails self-tests

• 1 electronic control board

• Disconnect power (unplug or switch off breaker) before beginning any work
• Handle the board carefully to avoid ESD damage; ground yourself or use an anti-static strap
• Installation typically requires removing the console or control panel and unplugging wire harnesses; follow OEM instructions

This wire harness routes power and signals between a dryer's control and components for reliable operation. It replaces damaged or frayed wiring to restore proper electrical connections and help eliminate intermittent faults. What it does

• Provides the factory wiring connections between control, motor, heating and safety components
• Restores lost or intermittent power caused by broken, burned, or corroded wires/connectors
• Prevents arcing and shorts when old wiring shows visible damage
• Ensures correct signal routing for controls and safety switches

• One complete wire harness assembly as shown

• Always disconnect power (unplug or shut off breaker) before starting service
• Route harness away from sharp edges and heat sources; secure with existing clips or ties
• Replace terminals or connectors that are melted or damaged to avoid future failures

Size: 8 x 1-1/4 inch.

This wire harness connector restores a reliable electrical connection between appliance wiring and components, helping eliminate intermittent power or control issues. It's a direct-replacement style part used where a broken or loose connector prevents proper function. What it does:

• Provides a secure electrical mating point between wiring and a control, sensor, or component
• Re-establishes continuity when a cracked, corroded, or damaged connector causes intermittent operation
• Helps stop flickering lights, components that don't power on, or erratic control behavior when connection is the cause
• Matches the OEM connector shape and pin layout for a correct fit and electrical contact

• Disconnect power (unplug appliance or shut off breaker) before inspecting or replacing electrical connectors
• Verify connector orientation and pin engagement; do not force if alignment feels incorrect
• Inspect wiring and terminals for damage; replace or repair any frayed wires or corroded terminals before reinstalling

This evaporator clip secures the refrigerator evaporator assembly and related components so the cooling system stays aligned and vibration-free. It helps maintain proper airflow and prevents rubbing or loose parts. What it does:

• Holds the evaporator coil/assembly or associated covers in place
• Prevents vibration, noise, and contact between the coil and cabinet parts
• Helps maintain consistent airflow for reliable cooling performance
• Commonly linked to rattling, buzzing, or loose parts around the freezer evaporator

• Disconnect power before servicing the appliance
• Handle evaporator and surrounding fins carefully; they are sharp and fragile
• Verify clip orientation against the OEM diagram before fastening

This heater is the dryer's heating element assembly that produces the hot air needed to dry clothes. Replacing a failed heater restores the dryer's ability to generate consistent heat and shorten dry times. What it does:

• Converts electrical energy into heat to warm airflow inside the dryer
• Restores normal drying performance when the element has failed
• Common symptom: dryer tumbles but produces little or no heat
• Also used when drying cycles take much longer than normal

• Disconnect power at the breaker before starting any repairs
• Handle carefully; edges on panels and housing can be sharp
• Inspect thermal fuse, thermostats, and vents when replacing the heater