Parts for Whirlpool WRF954CIHM00: 03 - Refrigerator Liner Parts

The Refrigerator Water Filter is an OEM part for Whirlpool refrigerators. It delivers clean, filtered drinking water and ice by effectively reducing contaminants, including chlorine taste and odor, particulates, and various other harmful substances that may be present in the water supply.

Causes of a bad Refrigerator Water Filter can include regular wear and tear over time leading to reduced efficacy in filtering out contaminants, as well as accumulation of contaminants and sediment.

Symptoms of a bad Refrigerator Water Filter include:

• Noticeable decrease in water flow rate.
• Unpleasant taste or odor in the water or ice.
• Discoloration of water or ice.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Water Filter Housing is an OEM part for Whirlpool refrigerators. It is the plastic housing that holds the refrigerator's water filtration cartridge in place within the unit. The housing ensures that water flows through the filtration cartridge as intended before being dispensed through the refrigerator door.

Causes of a bad housing can include cracks, leaks, or damage that compromise its ability to properly contain the filtration cartridge. Mineral buildup over time may also cause issues.

Symptoms of a bad housing include:

• Water not flowing through the dispenser
• Leaks around the water filter area
• Mineral deposits near the housing
• An ill-fitting or loose filtration cartridge

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This water tube routes water between the household supply and your appliance's dispenser or ice maker so water flows where it's needed. Replacing a damaged tube restores reliable water delivery and helps prevent leaks. What it does:

• Carries water from the inlet to the dispenser or ice maker assembly
• Prevents leaks when intact; cracks or holes can cause visible drips or puddles
• Supports proper filling of the ice maker and dispensing functions
• Can become brittle or clogged over time, interrupting water flow

• One water tube

• Shut off the household water supply and unplug the appliance before starting
• Inspect and replace any worn clamps or seals when installing the tube
• Route the tube along the original path and check for kinks that could restrict flow
• After installation, restore power and water, then check carefully for leaks

The Bracket is an OEM part for Whirlpool refrigerators. It securely holds the water filter in place, ensuring a tight seal and proper filtration of your refrigerator's water supply.

A bad water filter bracket can occur due to wear and tear, damage, or improper installation. If you notice symptoms such as a loose or misaligned water filter, water leakage around the filter area, or a decrease in water quality, it may be time to replace the water filter bracket.

Symptoms of a bad water filter bracket include:

• Loose or misaligned water filter
• Water leakage around the filter area
• Decrease in water quality or taste

Repair your refrigerator's water filtration system by replacing the faulty or damaged water filter bracket with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This replacement screw fastens trim, panels and small components to restore secure attachment and reduce rattling or movement. Use when a screw is missing, stripped, or damaged to keep parts aligned and operating quietly. What it does:

• Secures panels, brackets and trim to appliance assemblies
• Prevents vibration, rattling and misalignment caused by missing or damaged fasteners
• Replaces lost or stripped screws that can allow gaps or loose parts
• Helps maintain safe, stable operation by keeping components properly fastened

• Disconnect power (and water if applicable) before accessing interior panels
• Use the proper screwdriver or driver bit to avoid stripping the head
• Align parts before tightening and tighten until snug—do not overtighten
• Replace only with the correct OEM part to ensure proper fit and function

The Cap Filter is an OEM component for Whirlpool refrigerators. Located inside the back of the fresh food compartment, it helps maintain optimal indoor air quality by capturing household odors and gases.  

The precision-woven filter media effectively removes ethylene and other contaminants from circulating air without slowing airflow. Its secure mounting design installs and removes easily without tools for periodic replacement.

Causes of a faulty cap filter include clogging from accumulated particles or moisture remaining trapped over time, which reduces effectiveness.

Symptoms of a bad cap filter can include: 

• Lingering odors inside the refrigerator  
• Fresher items absorb smells faster than usual
• Decreased airflow causing warmer temperatures
• Small pieces of filter shedding inside

Replace yours today with this genuine Whirlpool filter to restore maximum odor protection. Compatible with many Kenmore, Maytag, Jenn-Air, and KitchenAid models.

Size: 8 x 1-1/4 inch.

This heater is the dryer heating element assembly that warms air used to dry clothes, restoring normal drying performance when the original element fails. Designed to replace a worn or broken dryer heater. What it does:

• Heats air circulated through the drum so laundry dries efficiently
• Replaces a burnt-out or open heating element that causes no-heat or reduced-heat symptoms
• Helps resolve long dry times or loads that remain damp after a full cycle
• Works with the dryer's thermal cutoff and thermostat to maintain operating temperature

• Disconnect power to the appliance before attempting service to avoid shock or injury
• Handle the element gently to avoid bending or damaging heating coils
• If other temperature-safety parts (thermal fuses/thermostats) show damage, inspect and replace as needed

This evaporator clip secures the refrigerator evaporator assembly and related components so the cooling system stays aligned and vibration-free. It helps maintain proper airflow and prevents rubbing or loose parts. What it does:

• Holds the evaporator coil/assembly or associated covers in place
• Prevents vibration, noise, and contact between the coil and cabinet parts
• Helps maintain consistent airflow for reliable cooling performance
• Commonly linked to rattling, buzzing, or loose parts around the freezer evaporator

• Disconnect power before servicing the appliance
• Handle evaporator and surrounding fins carefully; they are sharp and fragile
• Verify clip orientation against the OEM diagram before fastening