Parts for Kenmore 795.72303210 (79572303210, 795 72303210): Refrigerator Pantry Parts

This rail guide assembly supports and guides a sliding drawer/rack along its track so it opens and closes smoothly. Replacing a worn or broken guide restores proper alignment and motion, helping prevent sticking, jamming, or uneven travel.

• Supports and stabilizes the drawer/rack on its slide rail
• Helps ensure smooth, straight opening and closing
• Can address issues like binding, noise, or misalignment
• Replaces cracked, warped, or broken guide components

• Disconnect power and, if applicable, shut off water before servicing
• Remove the drawer/rack and retain any reusable hardware
• Install the new guide in the same orientation as the original
• Test movement for smooth travel before fully reassembling

This rail guide assembly replaces a worn or broken drawer rail to restore smooth, guided drawer movement and proper alignment. It supports the drawer glide so storage compartments open and close reliably. What it does:

• Guides and supports the drawer along its track for smooth sliding action
• Replaces damaged, bent, or worn rails that cause sticking, scraping, or misalignment
• Reduces noise from worn or loose drawer movement
• Helps keep the drawer square and properly seated to prevent jams

• Disconnect power to the appliance or remove contents as needed before starting work
• Basic hand tools typically required; keep fasteners for reuse unless replacements are provided
• Align rail on the drawer and cabinet track, then secure without over-tightening to avoid binding

This guide assembly secures and aligns internal TV components to keep the display and front panel stable during use. Replacing a damaged guide restores proper fit and reduces movement or rubbing that can affect the screen or bezel. What it does:

• Positions and supports the TV panel and adjacent internal parts for correct alignment
• Prevents panel flex, rubbing, and audible rattles caused by loose or broken guides
• Helps maintain an even bezel-to-screen gap and proper front-panel fit
• Restores mechanical stability after impacts or wear that crack or deform the original guide

• One guide assembly part as shown

• Disconnect power and fully remove the TV from its mount before starting
• Partial disassembly of the cabinet and removal of the front bezel/panel is typically required
• Handle the LCD/OLED panel carefully to avoid pressure marks or damage during installation
• Use the OEM fasteners and follow service manual orientation; test fit before final reassembly

This guide assembly is a replacement mounting guide that helps align and secure the TV's front panel and internal components to restore proper fit and reduce movement. It's a direct-fit part intended for OEM-style repairs. What it does:

• Holds and aligns the TV front bezel or panel for correct fit and finish
• Secures internal components to prevent shifting during use or transport
• Helps eliminate panel rattles, gaps, or misalignment caused by a damaged guide
• Restores proper assembly after impact or wear to improve appearance and stability

• One guide assembly

• Disconnect power and remove the TV from its stand before beginning
• Follow the TV service manual for safe disassembly and reassembly steps
• Keep track of screws and small parts; use proper tools and a soft work surface

This vegetable tray assembly replaces the crisper drawer that stores fresh produce and keeps it organized in the refrigerator. Restores proper storage and smooth drawer operation for better food organization and access. What it does:

• Provides a dedicated drawer for fruits and vegetables to help keep produce separated and contained
• Slides into the existing lower compartment tracks to allow easy open/close access
• Replaces cracked, broken or warped trays that can leak or fail to support contents
• Helps prevent items from falling onto lower shelves when the drawer is opened

• Remove all food and shelves from the compartment before starting
• Slide the old tray out and lift or unclip from its runners per your model's design
• Align new tray with existing tracks and slide in until it seats; no special tools typically required
• Unplug the appliance or disconnect power before working in the refrigerator for safety

This rear TV cover assembly replaces a damaged or cracked cabinet back to protect internal components and restore the TV's exterior appearance. It provides a secure mounting surface and helps keep ventilation openings intact. What it does:

• Replaces the rear cabinet to protect power and signal boards from dust and impact
• Restores the TV's original fit-and-finish and hides internal wiring and components
• Maintains designed ventilation paths to help prevent overheating when installed correctly
• Common service for cracked, warped, or cosmetically damaged back panels

• One TV rear cover assembly

• Unplug the TV and allow all capacitors to discharge before removing the old cover
• Handle the cover carefully to avoid scratching the finish or damaging alignment tabs
• Retain and reuse original screws and mounting hardware unless replacement parts are specified

This Tray Cover Assembly replaces a damaged or worn cover for the appliance tray, protecting contents and restoring proper tray function. It helps keep the tray sealed and aligned so the appliance operates as intended. What it does:

• Replaces a broken, cracked, or warped tray cover to restore proper tray protection
• Helps prevent spills or exposure of tray contents during normal use
• Ensures the tray sits and seals correctly to reduce rattling or misalignment
• Matches OEM fit and form for straightforward replacement when the original is damaged

• One Tray Cover Assembly as shown

• Designed to snap or fasten into place; follow your model's service manual for exact removal and installation steps
• Disconnect power or follow safety guidance for your appliance before beginning repair
• Inspect surrounding tray parts and fasteners for damage and replace if needed

The glass shelf is an OEM replacement part for LG side-by-side refrigerators. This glass shelf is responsible for providing storage space for food and drinks within the refrigerator compartment. 

Built from durable tempered glass, the shelf can support a significant amount of weight without breaking or bowing. Its transparency allows for easy visibility of all stored items. 

Symptoms of a bad shelf are:

• Cracks or chips in the glass surface
• Broken or detaching glass from the frame  
• Bowed or sagging shelf unable to properly support weight

Causes of a bad shelf include cracks or chips in the glass from heavy impacts or repeated sticking, as well as general wear and tear over time.

This tray assembly fits inside the fresh room/crisper area to support produce and contain spills, helping maintain an organized, easy-to-clean drawer. It replaces a cracked, warped, or missing fresh room tray to restore proper storage. What it does:

• Supports fruits and vegetables and helps keep them elevated for air circulation
• Collects moisture and minor spills to prevent messes in the fresh room
• Restores a drawer that won't seat or slides unevenly due to a damaged tray
• Matches OEM shape to align with drawer guides and seals

• Unplug the appliance or disconnect power before servicing
• Remove the fresh room drawer per the fridge manual, then lift out the old tray
• Align the new tray with guides and slide the drawer back into place; do not force
• Inspect surrounding seals and supports; replace any broken clips to ensure proper fit