Parts for Kenmore 795.74092410 (79574092410, 795 74092410): Refrigerator Parts

The Water Filter is an OEM replacement part for LG refrigerators. It is designed to remove impurities, contaminants, and unwanted particles from the water supply, ensuring that the water dispensed and used for ice making is clean and fresh.

Symptoms of a need to replace the water filter:

• Unpleasant taste or odor in the water or ice
• Decreased water flow from the dispenser
• Discoloration or sediment visible in the dispensed water

Causes of a faulty water filter can include general usage over time, exposure to high levels of contaminants in the water supply, or physical damage or clogging of the filter media.

This OEM LG part is also compatible with some Kenmore refrigerator models.

This door stopper is the replacement part that cushions and limits a refrigerator door's travel to prevent slamming and reduce wear on hinges and seals. It helps restore smooth, controlled door movement and alignment. What it does:

• Absorbs impact as the door closes to prevent hard slams and noise
• Limits how far the door opens to protect adjacent cabinetry and seals
• Helps maintain proper door alignment for an even seal and consistent cooling
• Common symptom: door slams, hangs up, or doesn't stop at the correct open position

• One door stopper

• Disconnect power or unplug the appliance before inspecting or working near door components
• Installation typically requires removing the door trim or hinge cover—refer to your model's service instructions
• Handle small parts carefully and retain screws or clips removed during replacement
• If the door is heavy or awkward, get a helper to support it during work to avoid damage or injury

This replacement glass shelf restores a sturdy, level storage surface in the refrigerator's fresh food section and helps contain small spills. Replace if the original glass is cracked, chipped, sagging, or missing to keep items stable and organized.

• Provides a flat, load-bearing surface within the shelf frame
• Helps contain minor spills for easier cleanup
• Maintains spacing and organization between shelf levels
• Typical symptoms: cracked/chipped or shattered glass, shelf won't sit flat, missing glass panel

• Remove food items and carefully slide out the shelf/frame assembly
• Wear cut-resistant gloves; remove any broken glass fragments safely
• Place the new glass fully into the frame, ensuring it's seated on all sides
• Reinstall the shelf and confirm it sits level before loading items

The Tray Assembly is an OEM part for LG refrigerators. This interior tray provides a dedicated storage shelf to organize items in the fresh food compartment. The tray is designed with edges to securely hold containers and packaging in place.

Causes of a bad tray can be cracks or fractures developing from long term use and weight exposure, or accidental damage from mishandling.

Symptoms of a bad tray include:

• Warping, bending, or breakage of the plastic tray over time
• Items placed on the tray sliding around excessively
• The tray no longer fitting properly inside the refrigerator shelving

This OEM LG part is also compatible with some Kenmore models.

This tray cover assembly replaces a cracked or missing fridge tray cover to protect stored items and restore the tray's proper fit and appearance. Fits the OEM tray location to keep contents separated and contained. What it does:

• Replaces a damaged or warped tray cover so food and items stay protected and organized
• Restores a proper seal/fit on the tray to reduce shifting and spills
• Prevents direct contact between items and the tray surface
• Helps maintain the original appearance of the fridge interior

• Unplug the appliance or disconnect power before starting any repair.
• Remove the old cover by lifting or sliding per the original mounting; avoid forcing parts to prevent breakage.
• Verify the replacement aligns with locating tabs and snaps fully into place.
• Reinstall clips or adjacent trim securely and test function before returning the appliance to service.

This is a vegetable tray assembly that holds and organizes fresh produce inside the refrigerator, helping contain spills and keep items from shifting for easier access and storage. What it does:

• Provides a dedicated bin for storing vegetables and fruits
• Keeps produce contained to prevent spills and cross-contamination with other shelves
• Slides on drawer rails for smooth access to stored items
• Restores proper fit and alignment if the original tray is cracked, warped, or missing

• Remove all contents and store perishables safely before beginning
• Slide the old tray off its rails and lift out; align and slide the replacement onto the rails until seated
• No special tools generally required; keep mounting clips or screws if present and reuse only if undamaged
• Disconnect power only if required by your refrigerator manual; for model-specific instructions and safety precautions

This vegetable tray assembly is the refrigerator's crisper drawer for fruits and vegetables. Replace a cracked or missing bin to restore organized produce storage and smooth drawer operation.

• Provides a dedicated bin for produce in the fresh food compartment
• Slides on the factory rails beneath the crisper cover for easy access
• Replaces drawers that are cracked, broken, warped, or missing
• Can help resolve sticking or off-track operation caused by a damaged bin

• Disconnect power and clear the crisper area before handling shelves or glass
• Pull the old drawer out to the stop, lift the front, and remove from the slides
• Align the new drawer with the rails and push straight in until fully seated
• If a shelf or cover obstructs removal, lift it out carefully and set aside

This TV back cover replaces a damaged or cracked rear cabinet to restore protection and appearance. It shields internal components, helps support internal mounts, and finishes the exterior of the television. What it does:

• Protects internal circuit boards, power supply, and connectors from dust, debris, and impact
• Restores the TV's exterior appearance when the original back panel is cracked, warped, or missing
• Maintains proper spacing for ventilation openings and component placement
• Provides mounting points for internal components and supports rear screw locations

• One TV back cover (rear cabinet) as shown

• Disconnect power and remove all cables before starting; handle the display and circuit boards with care
• Save and reuse any original screws, brackets, or grommets unless replacement hardware is explicitly listed
• Use basic hand tools; avoid over-tightening screws which can crack the plastic

This rail guide assembly keeps a refrigerator drawer or shelf sliding smoothly and aligned, restoring proper movement and reducing scraping or binding. It replaces a worn or damaged guide to help drawers open and close reliably. What it does

• Supports and guides the drawer or shelf along its track for smooth movement
• Prevents misalignment that causes sticking, scraping, or uneven travel
• Reduces noise from a worn or broken guide
• Restores proper fitment so drawers sit flush and operate correctly

• One rail guide assembly

• Disconnect power and empty the drawer before starting; refer to your manual for model-specific access
• Typically installs with basic hand tools; retain any removed fasteners for reassembly
• Inspect mating slides and mounting points; replace or repair damaged hardware to ensure proper operation
• Follow all safety guidance from the appliance manufacturer

This guide assembly supports and guides a slide-out drawer or shelf so it moves smoothly and stays aligned. It replaces worn, bent or broken guides to restore proper drawer travel and reduce noise or sticking. What it does:

• Provides a stable rail surface for the drawer or shelf to slide on
• Keeps the drawer aligned to prevent binding or uneven movement
• Replaces damaged or worn guides that cause sticking, grinding or wobbling
• Helps reduce noise from loose or misaligned drawer travel

• One guide assembly

• Disconnect power to the appliance before starting any repair when applicable
• Remove the drawer or shelf to access the guide; keep fasteners for reinstallation
• Inspect mounting points and replace any stripped hardware before installing the new guide
• Test drawer movement after installation to ensure proper alignment and secure fit

This case assembly is the outer housing for the refrigerator's Magic Room compartment, restoring the compartment's structure and proper fit so shelves and interior components mount securely. What it does

• Replaces damaged or cracked Magic Room housing that can prevent proper shelf support or alignment
• Restores correct interior spacing so drawers and accessories install and operate correctly
• Helps stop drafts or misalignment that can affect compartment sealing and temperature control
• Provides the mounting surface for related trim, shelves, and fasteners

• Disconnect power and, if applicable, turn off the water supply before beginning service
• Remove interior shelves, drawers, and trim to access and remove the old housing
• Align tabs and mounting points carefully; use original fasteners and avoid over-tightening screws