Parts for Kenmore 795.78343802 (79578343802, 795 78343802): Refrigerator Parts

The Screw is an OEM part for LG refrigerators. This part secures the shelf brackets within the refrigerator compartment.

Causes of a bad Screw can range from physical damage or impact to general wear and tear over time. 

Symptoms of a faulty Screw  include:

• Shelves feeling loose or unstable
• Shelves sagging or not sitting level
• Shelves falling out or collapsing when loaded with items

This OEM LG part is also compatible with some Kenmore models.

This slide rail mounts inside the refrigerator and guides a storage drawer so it opens and closes smoothly. Replacing a worn or broken rail restores proper drawer alignment and easy access to stored items. What it does:

• Supports the drawer and provides a smooth glide path along the cabinet wall
• Maintains alignment to keep the drawer level and on track
• Replaces cracked, warped, or worn rails that cause rough, uneven movement
• Common symptoms: drawer binds or sticks, tilts or sags, falls off track, or shows visible rail damage

• 1 slide rail

• Disconnect power to the refrigerator before servicing interior components
• Remove the drawer and any shelf/glass cover to access the rail
• Save and reuse existing mounting screws and any end caps/brackets; match the rail's orientation to the original if your model uses left/right rails
• Align the new rail with factory mounting points, tighten screws, and test for smooth operation

This rail guide assembly supports and steers a refrigerator drawer along its track. Replacing a worn or broken guide restores smooth sliding and proper alignment, helping prevent binding and damage to bins and rails.

• Guides the drawer as it opens and closes for smooth movement
• Helps keep the drawer level and properly aligned on the track
• Restores easy operation when the rail is cracked, worn, or deformed
• Typical symptoms: drawer hard to slide, tilts or drops, scraping/grinding noises, visible damage to the rail

• Disconnect power and empty the affected drawer before servicing
• Remove the drawer/bin and any screws or locking tabs securing the old guide
• Transfer any reusable clips or end caps from the old guide to the new assembly if present
• Reinstall, ensure proper engagement on the track, and test for smooth operation

This rail guide assembly supports and guides a refrigerator drawer so it slides smoothly and stays aligned. Replace a cracked or worn rail to restore easy opening/closing and keep the drawer from jumping off its track.

• Provides the sliding track and side support for one refrigerator drawer/pan
• Restores smooth movement and proper alignment of the drawer
• Can help resolve sticking, binding, tilting, or the drawer popping off the track
• Often needed when the rail is cracked, stop tab breaks, or wear causes rough travel

• Disconnect power and empty the affected drawer before service
• Remove the drawer (and any shelf above) for clear access; note the original side/orientation
• Release locking tabs or remove mounting screws to swap the rail; secure the new assembly in the same positions
• Reinstall the drawer and test for smooth travel before reloading

This shelf assembly replaces a damaged or missing refrigerator shelf to restore usable storage space and keep food organized. It provides a stable surface for holding containers and helps maintain proper airflow inside the compartment. What it does:

• Replaces a cracked, chipped, or warped shelf to restore safe, level storage
• Provides a flat support surface for food, pitchers, and containers
• Helps maintain organized storage to prevent spills and improve visibility
• Compatible with factory shelf mounting points for a secure fit

• Designed to drop into existing shelf supports or slide into factory tracks
• Handle carefully to avoid chipping glass or plastic edges; wear work gloves if needed
• Do not force into position; shelf orientation matches original before seating
• Disconnect power only if required to access interior lighting or electrical components

This vegetable tray cover is the replacement top for the refrigerator's crisper area, restoring a stable surface over the produce drawer and helping keep fruits and vegetables organized and contained. What it does:

• Replaces a cracked, chipped, missing, or cloudy crisper cover so the drawer opens and closes smoothly
• Provides a flat shelf surface above the vegetable drawer for storing items
• Helps contain spills and keeps produce separated from items on lower shelves
• Restores correct spacing and support for drawers and items above the cover

• One vegetable tray cover

• Remove all items from the crisper area before installing to avoid damage
• Slide or drop the cover into the drawer tracks or ledges until it seats; no special tools typically required
• If broken glass is present, wear gloves and eye protection and dispose of shards safely
• If cover does not seat correctly, check for obstructions or damaged support rails before forcing into place

This decorative shelf restores the finished look of the appliance door and provides a trim surface that covers the shelf area. It replaces a cracked, faded, or damaged trim piece to help the door look complete again. What it does:

• Replaces a damaged or worn decorative trim on the appliance door
• Covers the exposed edge of the door shelf area for a finished appearance
• Helps keep items on the door shelf from catching on rough or broken edges
• Restores factory appearance after impacts or cosmetic wear

• One decorative shelf

• Remove the old trim by gently prying with a plastic tool to avoid scratching surrounding surfaces
• Align the replacement trim and press into place until clips or snaps engage
• If fasteners are present, tighten only until snug; do not over-torque
• Wear gloves and eye protection when removing broken plastic to avoid cuts from sharp edges