Parts for Maytag MSS25C4MGB03: Refrigerator Shelf Parts

This replacement cover is a factory-designed protective piece used on select Whirlpool-built appliances. It shields the mounting area and internal components, restoring a secure fit and clean finish when the original cover is damaged or missing. What it does:

• Protects internal parts and wiring from debris and accidental contact
• Closes and finishes an opening to maintain proper operation and appearance
• Helps keep adjoining parts aligned and retained as designed
• Replace if the cover is cracked, warped, loose, or missing

• 1 cover

• Disconnect power; for water-using appliances, also shut off the water supply
• Use the correct screwdriver or nut driver; retain and reuse original fasteners
• Note the orientation and tab/slot locations before removal for proper reinstallation
• Do not overtighten; snug fasteners just enough to secure without cracking plastic

This shelf support stud anchors a refrigerator shelf to the cabinet liner so it stays level and secure. Replace a cracked or missing stud to restore proper support and prevent shelves from tilting, slipping, or dropping.

• Locks into the liner wall to provide a mounting point for the shelf frame or bracket
• Keeps the shelf aligned and at the correct height
• Common symptoms: broken/missing stud, shelf won't sit flat, shelf sags or falls on one side
• Helps prevent items from sliding due to an unstable shelf

• Disconnect power; remove the shelf and any items resting on it. Handle glass shelves carefully and consider wearing cut-resistant gloves.
• Remove the damaged stud (release the locking tab or twist out, depending on design).
• Insert the new stud into the existing hole until fully seated and locked.
• Reinstall the shelf and verify it sits level before reloading.

Pan-head screw used to secure panels, brackets and trim on Whirlpool appliances. Replacing a damaged or missing screw restores proper fastening to reduce vibration and keep assemblies aligned during operation. What it does:

• Secures panels, brackets and trim pieces to the appliance chassis.
• Stops loose panels from rattling, vibrating or shifting during use.
• Used when the original screw is stripped, corroded or missing.
• OEM replacement that restores the original fastening point.

• Unplug the appliance or shut off power before working on it.
• Use the correct screwdriver or bit to avoid stripping the head.
• Tighten until snug—do not overtighten or force in plastic parts.
• If the original hole or threads are damaged, inspect the surrounding area before reuse.

The Snack Pan Holder is an OEM part for Whirlpool refrigerators. It is designed to provide storage and easy access for snack pans, dips, and spreads within the fresh food or freezer compartments. The snack pan holder fits seamlessly onto shelves, preventing spills and keeping items organized. Please not this holder does not include the glass.

Causes of a bad snack pan holder include cracks or breaks from excessive bending or impact, discoloration or deterioration from long-term exposure to temperature extremes, or loose or missing mounting hardware that causes the holder to become unsecured.

Symptoms of a bad snack pan holder:

• Items stored on or in the holder fall over or spill easily  
• The holder itself has become loose, wobbly, or fallen off the shelf
• Small pieces of the holder are found inside the refrigerator

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This Whirlpool Glass Shelf is an OEM part for selected Whirlpool refrigerator models. Designed to offer a stable and aesthetically pleasing storage solution within your fridge, this glass shelf is crafted for durability and ease of cleaning.

Common issues include cracking, chipping, or shattering, which can compromise the safe storage of food items and affect the overall usability of the fridge.

Symptoms of a damaged fridge glass shelf include:

• Visible cracks or chips in the glass.
• The shelf sits unevenly or wobbles when items are placed on it.
• Difficulty in sliding the shelf in and out of its designated slots.
• The glass appears foggy, discolored, or has surface scratches.
• The shelf fails to support the weight of regular food items without bending.

This genuine Whirlpool OEM replacement part is compatible with Maytag, Jenn-Air, and Kenmore models.
 

The Holder Crisper Meat Pan is an OEM part for Whirlpool refrigerators. This holder provides support and stability for the crisper or meat pan, ensuring it slides in and out smoothly while securely holding the contents. Its dimensions are roughly 12 inches by 16 inches.

Causes of a bad holder crisper meat pan can include regular wear and tear, damage from overloading, or cracks and breaks due to mishandling. A damaged holder can lead to misalignment of the crisper or meat pan, making it difficult to use effectively.

Symptoms of a bad Holder Crisper Meat Pan include:

• The crisper or meat pan not sliding in and out smoothly
• The pan not staying in place or feeling loose
• Visible cracks or breaks in the holder
• Difficulty in accessing or organizing items within the pan

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

NOTE: PER FACTORY DOES NOT COME WITH GLASS FOR FRAME

• WITH GLASS ORDER PART # W11263198 

This humidity sensor housing holds and protects the fridge's humidity/control assembly, helping maintain proper humidity-sensing operation and reliable climate control. Designed to replace a cracked or damaged housing to restore proper sensor placement and protection. What it does:

• Secures and shields the humidity sensor and related control components
• Keeps the sensor correctly positioned for accurate humidity detection
• Prevents physical damage and moisture exposure to the sensor assembly
• Helps resolve symptoms like inaccurate humidity readings or loose sensor fit

• Disconnect power to the appliance before starting any repair
• Handle the humidity sensor carefully; remove and reinstall per manufacturer guidance
• Uses basic hand tools; refer to the service manual or OEM instructions for disassembly/reassembly steps
• Replace the affected components rather than reusing damaged parts