General Electric Washer S2000D2WW Pumps but will not spin

The Drive Belt is an OEM part for GE washing machines. It functions as a critical component that connects the motor to the drum, transferring power from the motor, which in turn allows the drum to spin during the wash cycle. Made from rubber reinforced with fibers, this belt is designed to withstand the stress of spinning and agitating motions.

Symptoms of a bad Drive Belt include:

• The washing machine drum not spinning,
• A squealing or screeching sound when the washer is running,
• Visible fraying, glazing, or signs of wear on the belt,
• The belt slipping off the motor or drum pulley.

Causes of drive belt failure typically include regular wear and tear from use, overloading of the washer which puts extra strain on the belt, or exposure to oils and other substances that can degrade the rubber.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Inner Tub Mounting is an OEM part for GE washing machines. It secures the inner tub to the washer's outer tub, providing stability and support during the wash and spin cycles. This mounting component is crucial for the proper alignment and operation of the washer's drum.

Causes of a bad mounting include excessive loads, continuous use over time, or physical damage due to impacts or misalignment. A faulty inner tub mounting can lead to significant operational issues and potential damage to other components.

Symptoms of a bad inner tub mounting include:

• Excessive vibration or shaking during wash or spin cycles
• Unusual noises or banging sounds
• The inner tub appearing misaligned or loose
• Leaks from the washer during operation

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This tub-bearing split ring is an OEM replacement part designed for GE washing machines. This part measures 2 inches in diameter. It is positioned between the inner and outer tubs to hold the tub bearing inside the outer tub. The Tub Bearing Split Ring not only supports the tub/hub assembly but also ensures smooth operation. 

Symptoms of a bad Tub Bearing Split Ring include:

• Excessive vibration or tub imbalance during spins  
• Loud clunking, knocking or grinding sounds  
• Reduced spin speeds or inability to achieve high RPMs
• Premature tub or bearing wear requiring replacement

Causes can be extended use over time which leads to wear and fatigue of the split ring material. Cracks or breaks can develop, reducing its stability and load-bearing capacity.

This genuine GE replacement part is also compatible with Hotpoint, RCA and some Kenmore front-load models. 

NOTE: For the washer outer tub seal order WH02X10383.

This transmission and brake assembly includes the tub seal and is used on many General Electric top load washers.

The Water Level Switch is an OEM replacement part specific to  GE-brand washing machines. It plays an important role in detecting appropriate water levels as the tub fills for selected cycles. The level switch prevents the washer from overflowing the wash tube.

Symptoms of a faulty water level switch include:

• Inability to select certain cycles requiring specific fill levels  
• The washer failing to enter agitation or spin periods on time
• Water remaining in the tub after the cycle has finished

Causes can be mineral buildup on the float or sensor over many years. Wired connections corrode or plastic housings develop cracks. 

This part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Capacitor is an OEM part for GE washing machines. It stores and releases electrical energy to help start the motor and regulate its speed, ensuring the washer operates efficiently and reliably. This component is crucial for maintaining the performance and longevity of the washing machine.

Causes of a bad capacitor can include electrical surges, wear and tear from regular use, or physical damage due to impact. Over time, capacitors can degrade, leading to reduced functionality or complete failure. Regular inspection can help identify potential issues early.

Symptoms of a bad capacitor include:

• The washer not starting or struggling to start
• Motor running inconsistently or not at full speed
• Unusual noises during operation
• Error codes related to motor function

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.