Need Help?
Call or text
Leaking is the most common symptom for Kenmore 106.53692202 (10653692202, 106 53692202). It takes Less than 15 minutes to fix on average. The instructions below from DIYers like you make the repair simple and easy. Many parts also have a video showing step-by-step how to fix the "Leaking" problem for Kenmore 106.53692202. So, if your 106.53692202 refrigerator dripping, has a leak or leaks water, the following info will help you identify the problem.
Parts for Kenmore 10653692202
Ice maker not filling or water dispenser leaking? This water inlet valve regulates water flow to both. DIY repair typically takes 10-20 minutes.
Order now and we'll ship it out Today
Over 94% of our orders are delivered in 2 days or less
Secures your refrigerator's water filter in place for effective filtration. Replace if cracked, leaking, or filter won't lock. Confirm fit by model number.
Water filter inlet tube kit for refrigerators. Connects water supply to filtration system. Replace if tube is cracked, leaking, or damaged.
Replace your refrigerator water filter every 6 months for clean, fresh-tasting water and ice. Simple twist installation. Verify fit with your model number.
Color: Black. Due to manufacturer changes this replacement is now 17" x 7".
This part is discontinued by the manufacturer and is no longer available for purchase.
Replaces the water tube that runs through your refrigerator door to the dispenser. Needed when the original tube is cracked, broken, or leaking.
Fix an ice maker that stopped working or leaks water into the bin. This ice mold tray replacement takes about 10-20 minutes with our step-by-step video.
Includes door, support, spring and mechanism delay. No longer uses the ribbon heater due to the improved foam design. If your refrigerator uses this ice door kit and the mounting tabs are broken you can use the broken tab ice door kit 8201756.
Reduces contaminants for cleaner, better-tasting water and ice. Replace every 6 months or when indicator light activates. Verify fit by model number.
Ice maker stopped making ice or won't eject cubes? The control module regulates ice production cycles. Simple 3-screw replacement restores function.
Replace your refrigerator water filter every 6 months to maintain clean water and ice. Removes contaminants for fresh taste. Easy DIY install in minutes.
Replace your refrigerator water filter every 6 months to ensure clean, fresh-tasting water and ice. Easy twist-on installation. Verify fit with your model.
Replaces a cracked, broken, or worn ice dispenser chute door on your refrigerator. Installs in the freezer door ice dispenser to control ice flow.
Loose or non-functioning water dispenser? This retainer secures the lever and restores spring-loaded action. Simple 5-10 minute DIY repair with video.
Stores and chills water before dispensing. Replace if cracked, leaking, or causing slime/film buildup in dispensed water. Installs inside refrigerator.
Ice maker leaking or shutoff arm broken? This fill cup and bearing assembly directs water into the mold and supports the arm. 15-minute DIY fix.
Ice dispenser won't close or dispenses continuously? This dispenser door pin kit restores proper flapper operation. Easy DIY repair with video guide.
Connects water tubes of different sizes at the base of your refrigerator door. Replace if leaking, cracked, or calcified to restore a watertight seal.
The Whirlpool EveryDrop Refrigerator Water Filter 7 features a coconut carbon filter that reduces contaminants to provide clean, fresh tasting water. This filter is used Whirlpool side-by-side refrigerators which accept Filter 7. Single filter. Simple, quick turn installation requires no special tools. For best performance, replace every six months. Certified to fit these leading refrigerator brands: Maytag and Jenn-Air. Micron Rating: 0.5. Filter Media: Coconut Carbon Block. Flow Rate: 0.5 GPM. Temp Range: 33 - 100 °F. Pressure Range: 30 - 120 psi. Meets NSF Standard: 42. Approved for WQA Gold Seal. Approximate dimensions: 8.25" x 8.25" x 6.5"
Amana Clean 'n Clear. Single pack. Used in Amana refrigerators where filters can be accessed inside the refrigerator. Simply twist and turn to remove and replace, no tools necessary. While retaining beneficial fluoride, this filter reduces cysts, chlorine taste and odor, particulates (class I), and lead. Recommended replacement every 6 months or 300 gallons for optimal performance and efficiency. This filter is certified To Meet all of the NSF/ANSI 42 standards for Materials Safety, Structural Integrity, System performance and the reduction of Chlorine Tastes and odors By IAPMO. Color: white. Flow Rate: 0.5 gpm. Operating Pressure: 30-120 ps. Temperature: 38-100°F. It measures about 3-1/2 inches in diameter by 6 inches high.