Parts for Tecumseh H35-45608R: Replacement Parts

The oil seal is designed to stop fluid from leaking out, as well as to ensure that dirt and other debris do not make their way into the oil. When applied properly, it should create an impermeable seal. It also provides spacing between the crankcase and the crankshaft. If the oil seal has been damaged or has degraded because of wear and tear, it will need to be replaced. Some of the signs that the oil seal might be bad include leaks or an engine that is not performing properly. Users might also notice that the machine is going through oil quickly. This is an authentic OEM product that is sold individually. The oil seal can be used with many types of lawn and garden equipment including lawn mowers, snowblowers, tillers, pressure washers, wood chippers, generators, and other small engines. Compatible brands including Briggs & Stratton, Simplicity, Snapper, MTD, Lawn-Boy, Tecumseh, Cub Cadet, Toro, and Craftsman.

This on-off switch terminal is composed of electrical contact areas that connect to a charge or load on a battery. One is marked for positive current while the other is where the current returns to. These terminals can sometimes stop working or suffer corrosion which makes them dangerous to use. Brushing and cleaning a terminal can help remove dirt and debris, but a malfunctioning terminal requires a replacement. This is the case if the corrosion is severe enough to eat away at the metal or the terminal doesn’t clamp on the way that it should. The battery terminals can be removed and replaced using tools like pliers, a socket set, a wrench set, and a hacksaw. This terminal is a genuine OEM component directly from the manufacturer. It’s designed to be used on engines of snowblowers, lawnmowers, chipper shredders, and tillers. It is compatible with Tecumseh, Husqvarna, Toro, Troy-Bilt, Craftsman, Simplicity, Cub Cadet, Briggs & Stratton, and MTD equipment. Some items that can help with installation include anti-corrosion spray, felt pads, and heat-shrink tubing.

This genuine Tecumseh cylinder head gasket cover can be used as a replacement part for the small engine of a snowblower or a tiller. The cylinder head gasket seals off the cylinder head from the engine block. The function of a cylinder head gasket cover is to protect the cylinder head from damage and provide additional insulation.A cylinder head gasket cover might suffer damage over time from general overuse or wear and tear. This damage can come in the form of punctures, piercings, and corrosion to the cover that chip away at the gasket cover's ability to protect the cylinder head gasket and seal it off. If cylinder head gasket cover shows these signs of damage, it should be immediately removed and replaced with this genuine OEM part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This cylinder head gasket cover is compatible with the following brands: Tecumseh, Toro, Craftsman, and Husqvarna.

This genuine OEM intake manifold gasket is found on lawnmowers, snowblowers, and other lawn and garden equipment. The intake manifold gasket protects the carburetor from debris and containments that would affect the engine performance. If the engine misfires, surges, won't start, or is running hot; the intake manifold gasket could be causing the problem. Normal wear and tear can cause the gasket to tear or have debris buildup and need to be replaced.The manifold intake gaskets need to be inspected and replaced on a regular basis even when there is not an engine issue. If the motor is misfiring or overheating, the intake manifold gasket is one place to check. Empty the fuel tank and make sure there is no fuel in the carburetor. Disconnect the spark plug and remove it from the engine. Make repairs in a well-ventilated area. Remove the old gasket and clean the area to ensure a tight fit when the new ones are installed. This manifold intake gasket is sourced directly from the manufacturer and sold as an individual part. It is compatible with lawnmowers, snowblowers, tillers, and pressure washers manufactured by Craftsman, Toro, and Tecumseh.

Spark plug covers can help to ensure added protection for the sparkplugs and can make sure that there is no debris getting on them. While the spark plug covers are long-lasting, they will eventually need to be replaced. Over time, they will start to dry, crack, and come apart. When this happens, replace the covers right away. Also replace the spark plugs at the same time. The OEM spark plug cover is sold individually, be sure to get enough to cover all the plugs. The cover can work with many different brands, including Craftsman, Briggs & Stratton, Toro, Cub Cadet, Troy-Bilt, Tecumseh, Lawn-Boy, Snapper, MTD, and Simplicity. The covers can work for many types of machines, including lawnmowers, generators, chippers, log splitters, edgers, pressure washers, tillers, and other small engines.

This is a genuine replacement flywheel nut that comes from the manufacturer Tecumseh. Nuts are used in various applications in a range of different types of machines. This flywheel nut is made from metal and is used to fasten the engine's flywheel to the crankshaft assembly. It helps to ensure that the connection is tight and that it does not start to come loose during operation. Nuts are a commonly lost part when making repairs on a machine or even during routine maintenance. The flywheel nut could also become corroded or otherwise damaged over years of use. If this happens, owners will want to be sure to replace the nut as soon as possible. Replacement for the flywheel nut tends to be fast and simple. This is an authentic OEM flywheel nut that is sold individually. The nut is a common part and can be used on many different machines. These include lawn mowers, snowblowers, generators, log splitter, wood chippers, pressure washers, generators, tillers, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Cub Cadet, Tecumseh, Lawn-Boy, Snapper, MTD, and Simplicity.

This is a genuine cylinder head bolt replacement designed for use on select small engines found in outdoor power equipment. The cylinder head bolt is responsible for securing the cylinder head in the engine. It is exposed to constant vibrations and high pressure, which can lead to eventual wear and damage. These bolts will need to be replaced immediately if they become damaged or broken. If the bolts are not replaced, the cylinder head will not be secure and that could cause further engine damage or total failure. This genuine OEM replacement bolt is manufactured by Tecumseh and designed for use in engines in a number of its small outdoor power machines. This part is compatible with dozens of engines and the exact number of bolts and placement may vary based on the model. The parts diagram should provide information on the application and location of this part. This bolt is sold as an individual unit, and those who need more than one will have to order multiple quantities. Always wear gloves for hand protection and allow the engine to cool before performing any engine repairs. This replacement bolt requires a hex socket or screwdriver.

This screw is a genuine Tecumseh replacement part for several different kinds of small engines, including lawn tractors, lawn mowers, snowblowers, woodchippers, and generators. A screw's function is to tightly join parts together through rotation of the screw. This prevents the materials from loosening and unfastening over time. A screw might be misplaced or lost the screw altogether, since it is a small object that can easily fall out of its place and disappear if loosened. Other reasons to replace a screw can include the gradual deterioration, erosion, cracking, or piercing over time; this kind of damage can be attributed to general overuse or exposure to the elements. If a screw is subject to any of this kind of damage, it is best to replace it before using the appliance at hand, as the pieces must continue to be held together by the screw. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This screw is compatible with the brands Tecumseh, Craftsman, Toro, and Briggs and Stratton. This part sold individually.

This is a genuine OEM replacement fuel cap sourced directly from the manufacturer. The fuel cap is used on lawn and garden engines that are powered by fuel. It is an integral part of the machine's fuel delivery system. Fuel caps prevent fuel from seeping out of the fuel tank and becoming a safety hazard. The cap's primary function is to keep fuel in the tank and keep water and other contaminants out of the fuel. Everyday use and outdoor elements can cause deterioration of the fuel cap. During scheduled maintenance and refueling of the tank, a visual inspection can quickly show any damage that needs to be addressed. The fuel cap cannot be repaired; it is a one-piece molded-plastic component that must be replaced when necessary. Tools are not required to replace the fuel cap. Work gloves should be worn when working with fuel. Unscrew the broken fuel cap and remove it from the fuel tank. Screw the new filler cap in place. Make sure the threads are lined up and the fit is tight.This fuel cap is sold as an individual unit. It is compatible with fuel tanks on lawn mowers, tillers, generators, and other engines manufactured by Tecumseh, Craftsman, Toro, and Briggs & Stratton.

This durable metal screw is used in various types of lawn and garden equipment. A screw can be used on its own to attached two components together. It can also be used with a nut when there is a pre-drilled, threaded hole for it to go in. If a nut is being used, it should have the same finish and use the same threading as the screw does.This screw is typically used to fasten a fuel tank to a tank mounting bracket on the engine. It can be damaged in many ways and will need to be replaced if it has failed. Extreme temperatures, excess stress, and corrosion can all damage or break the screw. Do a visual inspection of the part to see if it has any wear and tear or has broken. If it has, it can be replaced using a screwdriver.This screw is designed to be used with lawnmowers, snowblowers, tillers, pressure washers, edgers, generators, and wood chippers manufactured by Briggs & Stratton, Craftsman, Cub Cadet, Toro, Tecumseh, Lawn-Boy, Snapper, Simplicity, and MTD. It is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual screw.

This is a genuine fuel line replacement that can be used with select small engines found in outdoor lawn and garden equipment. The fuel line is responsible for delivering or returning fuel to or from the engine while it is in operation. The engine typically has a fuel return line and an intake line, and both can become corroded, worn, or cracked over time with constant exposure to chemicals and high temperatures. If the fuel lines are damaged, they can leak or fail to work at all, making the engine inoperable. When doing repairs, both lines should be replaced at the same time for consistency. This genuine fuel line provides an exact fit for compatible models. This genuine OEM fuel line is manufactured by Craftsman and designed for use in engines on their lawn and garden equipment, as well as certain models from MTD. It can be used on 4-cycle engines found in lawn tractors and chipper/shredder units that are compatible. This fuel line is made of durable rubber and sold as a single unit. Those who need two lines will have to purchase additional quantities. Always drain the fuel and disconnect the spark plug before working on the fuel tank assembly or fuel lines of any engine.

This is a genuine OEM carburetor sourced directly from the manufacturer designed for use in tillers and other small engines. The carburetor controls the mixture and gas and air that reaches the engine at different speeds. Regular use for prolonged periods can lead to the carburetor's failure, resulting in a sluggish engine and reduced fuel economy. A buildup of debris in the carburetor can also cause failure due to clogged airways preventing fuel from reaching the engine. Replacing the carburetor will solve these problems and is much less costly than buying entirely new equipment. Replacing the carburetor requires less than hour of work and a screwdriver, socket or wrench set, and clean basin. Remove the spark plug from the engine and drain the fuel into the clean basin. Locate the air filter and remove it. Remove the fuel line and crankcase. Remove the carburetor from the engine. Install the new carburetor. Reinstall the parts in reverse order. Start the engine and test the carburetor. This is a carburetor made of heavy-duty metal and molded plastic parts; it is sold as an individual pre-assembled unit. The carburetor is compatible with tillers and other small engines manufactured by Toro, Tecumseh, Cub Cadet, and Craftsman.

Also known as a rewind starter, the recoil starter assembly is used on many types of lawn and garden equipment. It is the part that enables the engine to start the combustion process. When the recoil starter is performing properly, the engine can be easily turned on by hand. This is an essential part, and the equipment's motor cannot function without it.A failing recoil starter assembly can be caused by simple wear and tear on the component. If the pull string on the lawn and garden equipment is slack and can't be pulled, the component will need to be replaced. The process involves taking off the recoil housing cap, untying the rope, and re-tensioning the spring. Replace the part and reassemble the rest of the components.This recoil starter assembly is sold on an individual basis. It is a genuine OEM replacement part that is directly sourced from the manufacturer. The assembly is compatible with several lawnmowers, snowblowers, and generators manufactured by Briggs & Stratton, Craftsman, Tecumseh, and Toro.