Parts for APHD10AXWBW1: Room Air Conditioner Parts

This universal lower-rack wheel replaces a broken or worn roller to restore smooth, stable movement of your dishwasher's lower rack. Designed to snap into the rack assembly for reliable rolling action and better loading. What it does:

• Replaces a damaged or missing lower-rack wheel so the rack rolls evenly and doesn't catch
• Helps prevent noisy, jerky rack movement and reduces strain on the rack track
• Restores proper alignment so dishes load and unload without tipping
• Fits common GE-style lower rack assemblies using the same mount style as the original

• Designed for simple replacement; wheel snaps into the rack support—check for retaining clips or screws on some rack styles
• Disconnect power to the dishwasher before performing any service
• Inspect the rack axle/clip and track for damage; replace any broken hardware to ensure proper function

This hose connector is the molded elbow that joins dishwasher hoses to the tub or pump, restoring a secure watertight path for inlet or drain flow. Replace a cracked or worn connector to stop leaks and keep your cycle operating correctly. What it does:

• Connects flexible hose to the dishwasher pump or tub, directing water flow
• Provides a sealed elbow joint to prevent leaks at hose connection points
• Commonly replaced when cracked, split, or when hoses become loose or leak
• Helps restore proper filling or draining when the connector is the source of water loss

• One hose connector

• Disconnect power and shut off the water supply before beginning work
• Drain any standing water and place towels to catch residual water
• Inspect and replace hose clamps when reinstalling to ensure a tight seal

This exhaust hose directs vented air from the appliance to the home vent, restoring proper airflow and helping prevent excess heat and cooking odors in the cabinet or vent path. It replaces damaged or crushed ducting for safer operation. What it does:

• Provides a flexible, enclosed pathway for exhaust air from the appliance to the vent outlet
• Restores proper ventilation when original hose is cracked, split, or collapsed
• Helps reduce heat buildup, odors, and poor vent performance caused by damaged ducting
• Fits between appliance vent collar and house vent with hose clamps or adapters

• Disconnect power to the appliance before installing; follow all appliance safety procedures
• Slide hose onto the appliance vent collar and house vent, secure with appropriate clamps or connectors
• Avoid sharp bends, kinks, or crushing the hose; maintain a smooth, short vent run for best airflow
• Follow local venting codes and the appliance manufacturer's installation instructions

This top bracket secures the appliance's top panel to the cabinet, restoring proper alignment and reducing movement. It replaces a worn or broken top panel support to stop rattling and improve part fitment. What it does:

• Anchors the top panel to the cabinet frame to prevent shifting or gaps
• Restores correct panel alignment that can cause rubbing or uneven seams
• Stops vibration-related noise from a loose top panel
• Helps keep adjacent panels and controls stable during use

• Disconnect power and, if applicable, gas before beginning work.
• Use appropriate hand tools; support the top panel to prevent it from falling when removing fasteners.
• Inspect surrounding clips and screws; replace any damaged fasteners for a secure fit.

This top window bracket secures the appliance door/window assembly so the glass and trim stay aligned during normal use. It restores proper fit and helps prevent rattling, misalignment, or gaps around the window. What it does:

• Secures the top portion of the door/window assembly to the frame for stable alignment.
• Helps stop rattling or vibration caused by a loose or worn bracket.
• Restores correct spacing to prevent rubbing or uneven gaps around the window.
• Supports safe, consistent operation of the door/window during opening and closing.

• Disconnect power to the appliance before beginning any repair to avoid electrical or shock hazards.
• Remove the door or panel per the manufacturer instructions to access the bracket; keep track of screws and fasteners.
• Use appropriate hand tools; avoid over-tightening fasteners which can crack trim or glass.
• If the bracket attaches to or supports glass, handle glass carefully and consider wearing cut-resistant gloves and eye protection.

This is the lower door bottom window for select GE appliances, a direct-fit replacement that restores the door's protective glass and visibility. Replacing a damaged bottom window helps maintain safe operation and appearance. What it does

• Replaces a cracked, chipped, scratched, or broken bottom door window
• Restores visibility into the appliance cavity and protects internal components
• Helps maintain proper door sealing and safe use when the window is intact
• Matches OEM fit and mounting locations for straightforward replacement

• One bottom window (lower door glass) as described

• Handle carefully: glass edges can be sharp; wear cut-resistant gloves and eye protection
• Remove power to the appliance before beginning any door or glass work
• Follow OEM door-disassembly steps and keep small fasteners organized

A pointed screw used to fasten appliance panels and trim where a self-starting tip is needed. Provides a secure hold for interior/exterior plastic or sheet-metal parts and helps keep covers and trim aligned. What it does:

• Fastens panels, trim, or lightweight components where a pointed, self-starting tip is required
• Secures parts that need a shallow pilot or thread-cutting action into thin metal or plastic
• Helps stop rattles and loose panels by holding trim and covers firmly in place
• Common replacement when original screws are stripped, missing, or corroded

• Use the correct screw size and screwdriver to avoid damaging threads or surrounding parts
• Start threading by hand to ensure alignment, then tighten securely but do not over-torque
• Disconnect power or follow appliance safety procedures when working near electrical components
• Replace stripped or damaged mating threads before installing a new screw for a lasting repair

A replacement bottom foam seal that fits the lower front edge of the refrigerator door to help limit drafts, block debris and pests, and improve temperature stability. Simple foam construction for a discreet, low-profile seal. What it does

• Seals the gap at the door bottom to reduce cold air loss and warm air infiltration
• Helps keep dust, crumbs and small pests from entering under the door
• Reduces moisture and frost buildup that can occur from air leaks
• Supports consistent interior temperature for better cooling performance

• Disconnect power to the appliance before installing and work with the door supported
• Remove any old seal and clean the mounting surface so the new foam seats properly
• Press the foam seal into place; some models may use clips or a small amount of adhesive