Parts for CPR10XC9L: Room Air Conditioner Parts

This drain plug seals the appliance drain port to prevent leaks and keep drainage pathways closed when service or parts are removed. It restores a watertight seal and helps prevent unwanted water loss or spills. What it does:

• Seals the drain outlet to stop dripping or leaking from the drain port
• Helps contain water during component removal or service
• Prevents debris from entering the drain opening
• Useful when replacing or servicing drain hoses or drain assemblies

• Disconnect power and turn off water supply before servicing
• Remove any panels or access covers as required to reach the drain port
• Push the plug firmly into the drain opening until fully seated; do not force with excessive tools
• Inspect surrounding gasket/surfaces for damage and replace if worn to ensure a proper seal

This caster is the wheel assembly that lets your appliance roll and sit securely. Replacing a worn or damaged caster restores smooth movement and helps the appliance sit level for safer use. What it does:

• Replaces a failed wheel assembly so the appliance can be moved without scraping or sticking
• Supports appliance weight at one corner and helps maintain proper leveling
• Reduces rocking, uneven contact, and wheel-related noise when moving the unit
• Prevents damage to flooring and cabinet edges caused by a broken or missing caster

• Unplug the appliance and empty contents or secure heavy shelves before starting
• Support the appliance with a block or jack; do not rely on the caster or tilt it unsafely
• Remove the old caster fastener(s) and install the replacement using the same mounting method
• Check and adjust leveling after installation; replace additional casters if others are worn

This grill assembly replaces a damaged or worn exterior grill to restore appearance and proper airflow on compatible GE cooking appliances. It's a direct-fit exterior piece that keeps the front of the unit looking finished and functioning as intended. What it does

• Covers and protects internal components behind the appliance opening
• Helps direct airflow and venting where designed by the manufacturer
• Restores a finished front appearance if the original grill is cracked, bent, or missing
• Prevents debris from entering vent openings

• For safety, disconnect power to the appliance before inspecting or replacing this part.
• Installation typically requires removing adjacent panels or trim; keep fasteners and parts organized.
• Handle edges carefully to avoid scratches or cuts; use a soft cloth to protect finished surfaces.

This exhaust connector links the appliance exhaust outlet to the venting system, restoring proper airflow and helping the appliance expel combustion gases or moisture safely. Designed as the direct replacement part to repair damaged or missing connectors. What it does:

• Provides a secure pathway from the appliance exhaust outlet to ducting to prevent leaks.
• Restores proper vent airflow to improve drying/heating performance and reduce overheating.
• Helps stop exhaust backflow that can cause odors, moisture buildup, or poor operation.
• Replaces cracked, broken, or corroded connectors that compromise ventilation.

• One exhaust connector

• Disconnect power and gas before servicing; verify the appliance is fully isolated.
• Remove nearby panels as needed to access the exhaust outlet; use gloves to avoid sharp edges.
• Fit connector onto the outlet and duct, secure with appropriate clamps or fasteners.
• After installation, inspect for gaps or leaks and run the appliance to confirm proper venting.

This replacement remote control restores full control of microwave front-panel functions from a distance, making it easy to start, stop and adjust cook settings without touching the appliance. Simple swap to regain convenient remote operation. What it does:

• Sends commands to the microwave to start/stop cooking and select basic functions
• Allows selection of cook time and power level from the remote
• Helps when on-unit controls are hard to reach or the original remote is lost or unresponsive
• Resolves symptoms such as unresponsive remote buttons, intermittent remote control operation, or no remote control function

• Install or replace batteries as required by your model before use
• Point remote at the microwave receiver and press a button to confirm operation; replace batteries if response is weak
• Handle the remote carefully; avoid exposing it to moisture or impact

This replacement air filter helps reduce food odors and keeps refrigerator air fresher for stored items. It installs in the refrigerator's air/filtration housing to help maintain interior air quality. What it does:

• Adsorbs and reduces common refrigerator odors to help keep food smelling fresher
• Circulates filtered air within the fresh food compartment when the refrigerator fan runs
• Replaces a worn or saturated filter that may no longer control odors
• Compatible with refrigerators that use a dedicated in-cabinet air deodorizer/filter

• One air filter

• Install in the refrigerator's air filter/deodorizer slot; no special tools typically required
• Replace on manufacturer-recommended schedule or when odors return; dispose of the old filter per local guidelines
• If working near electrical components, unplug the appliance or switch off power at the breaker for safety

This exhaust hose (also called a vent hose) routes hot discharge air from the unit to the window vent so the room can cool properly. Replacing a cracked or collapsed hose restores correct airflow and prevents hot air recirculation.

• Vents warm air from the appliance to the outside through the window kit
• Maintains proper airflow for normal operation
• Common signs of failure: visible cracks or tears, air leaks, hose won't stay attached, persistent kinks, reduced venting or poor cooling performance

• Unplug the unit and allow it to cool before service
• Transfer existing end adapters/couplers to the new hose as required and seat fully on both connections
• Route the hose as short and straight as possible; avoid sharp bends or crushing
• After installation, run the unit and check for secure connections and air leaks

Condenser blower wheel that circulates air across the condenser coils to help remove heat, improving cooling efficiency and extending appliance life. Replaces a worn or damaged condenser fan wheel to restore proper condenser airflow. What it does:

• Moves air over the condenser coils to dissipate heat
• Restores proper condenser airflow when the wheel is cracked, bent, or missing blades
• Helps reduce unusual noise or vibration coming from the condenser area
• Can improve cooling performance when condenser airflow is restricted

• Disconnect power to the appliance before starting any repair.
• Remove access panels to reach the condenser fan area; keep track of fasteners.
• Ensure the wheel clears housing and spins freely after installation; reorient to match original airflow direction.
• If the fan motor or mounting hardware is damaged, replace those components as needed for safe operation.