Parts for HPND14XHM: Room Air Conditioner Parts

A simple replacement plug used to cover and seal an unused body opening or wiring passage on the appliance, helping keep moisture, debris and pests out while maintaining a clean appearance. What it does

• Covers an unused chassis or cabinet opening to prevent dust and debris from entering.
• Helps keep moisture and pests out of internal compartments.
• Protects wiring and components by closing off access points.
• Restores factory appearance where a plug is missing or damaged.

• One plug as shown.

• Disconnect power to the appliance before attempting any service.
• Locate the opening or chase where the plug fits; align and press the plug into place until fully seated.
• If the plug is brittle or damaged, replace it rather than forcing; use OEM part for correct fit.

This caster is the wheel assembly that lets your appliance roll and sit securely. Replacing a worn or damaged caster restores smooth movement and helps the appliance sit level for safer use. What it does:

• Replaces a failed wheel assembly so the appliance can be moved without scraping or sticking
• Supports appliance weight at one corner and helps maintain proper leveling
• Reduces rocking, uneven contact, and wheel-related noise when moving the unit
• Prevents damage to flooring and cabinet edges caused by a broken or missing caster

• Unplug the appliance and empty contents or secure heavy shelves before starting
• Support the appliance with a block or jack; do not rely on the caster or tilt it unsafely
• Remove the old caster fastener(s) and install the replacement using the same mounting method
• Check and adjust leveling after installation; replace additional casters if others are worn

This increaser is a small hose adapter that lets you join mismatched appliance hoses or vent tubing for a snug, leak-resistant connection. It helps restore proper flow and prevents loose or leaking hose connections. What it does:

• Adapts one hose or vent diameter to a larger size for a secure fit
• Restores proper airflow or water flow when hose sizes don't match
• Helps stop leaks and reduces vibration at a mismatched connection
• Useful for dryer, washer, or appliance exhaust/drain hose repairs

• Turn off and unplug the appliance and shut off water/gas as applicable before installing
• Use appropriate clamps or fasteners and tighten evenly to prevent leaks
• Inspect the connection and run a short cycle to check for leaks or loose fit

This replacement air filter helps reduce food odors and keeps refrigerator air fresher for stored items. It installs in the refrigerator's air/filtration housing to help maintain interior air quality. What it does:

• Adsorbs and reduces common refrigerator odors to help keep food smelling fresher
• Circulates filtered air within the fresh food compartment when the refrigerator fan runs
• Replaces a worn or saturated filter that may no longer control odors
• Compatible with refrigerators that use a dedicated in-cabinet air deodorizer/filter

• One air filter

• Install in the refrigerator's air filter/deodorizer slot; no special tools typically required
• Replace on manufacturer-recommended schedule or when odors return; dispose of the old filter per local guidelines
• If working near electrical components, unplug the appliance or switch off power at the breaker for safety

This increaser is a small adapter used to join water lines or hose fittings where a larger inlet is needed. It creates a secure connection to help restore correct water flow and reduce the chance of leaks at the joint. What it does:

• Adapts a smaller hose or tube to a larger inlet size to complete a water-line connection
• Restores a proper fit when a direct connection is too loose or mismatched
• Helps prevent drips or leaks caused by an improper hose-to-inlet fit
• Often used when replacing or repairing water supply lines for icemakers, dispensers, or valve assemblies

• Turn off the water supply before removing or installing the fitting to avoid flooding
• Tighten fittings by hand, then secure with the appropriate wrench; avoid over-tightening which can damage threads
• Inspect nearby hoses and seals for wear and replace if needed to ensure a leak-free connection

This grill assembly replaces a damaged or worn exterior grill to restore appearance and proper airflow on compatible GE cooking appliances. It's a direct-fit exterior piece that keeps the front of the unit looking finished and functioning as intended. What it does

• Covers and protects internal components behind the appliance opening
• Helps direct airflow and venting where designed by the manufacturer
• Restores a finished front appearance if the original grill is cracked, bent, or missing
• Prevents debris from entering vent openings

• For safety, disconnect power to the appliance before inspecting or replacing this part.
• Installation typically requires removing adjacent panels or trim; keep fasteners and parts organized.
• Handle edges carefully to avoid scratches or cuts; use a soft cloth to protect finished surfaces.

Condenser blower wheel that circulates air across the condenser coils to help remove heat, improving cooling efficiency and extending appliance life. Replaces a worn or damaged condenser fan wheel to restore proper condenser airflow. What it does:

• Moves air over the condenser coils to dissipate heat
• Restores proper condenser airflow when the wheel is cracked, bent, or missing blades
• Helps reduce unusual noise or vibration coming from the condenser area
• Can improve cooling performance when condenser airflow is restricted

• Disconnect power to the appliance before starting any repair.
• Remove access panels to reach the condenser fan area; keep track of fasteners.
• Ensure the wheel clears housing and spins freely after installation; reorient to match original airflow direction.
• If the fan motor or mounting hardware is damaged, replace those components as needed for safe operation.